This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner ...
$15.95
In Stock
Order within the next 3 hrs and your part ships today!
This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction ...
An authentic high quality retainer that is supplied directly from original equipment manufacturer for use with Murray, Snapper and Simplicity snowblowers. This part is secured on the bottom of the chu...
This is an OEM part sourced directly from the manufacturer. The wheel bushing is designed for use in snow throwers from Murray, Snapper, and Simplicity. This part is made of high-quality plastic, an...
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
