1608000 Maytag Microwave - Overview

Diagrams for 1608000

See every part. Know exactly what you need.

01 - Page 1

Parts for the 1608000

$29.65

Heat Resistant Adhesive

★★★★★

(1)

Part #W10841140

This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.

$16.37

Ceramic Fuse - 20 amp

★★★★★

(1)

Part #WPM0805101

This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.

$10.40

Dryer Screw

Part #WP90767

This screw is sold individually.

$12.05

Range Hex Nut

Part #WP488130

Part may differ in appearance, but functions same as original.

$11.76

Screw

Part #WP489474

Sold individually.

USE MAC 59001166

Part #M10D56

SUB 46587P01

Part #M12D83

SUB M0282005

Part #M1D363

USE MAC A4539629

Part #M1D608

USE MAC M0200316

Part #M1D888

SUB M0234029

Part #M1D9

USE MAC 10825501

Part #M20D63

Common Symptoms of the 1608000

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

microwave oven blew fuse

27 of 43 people found this instruction helpful.

tad from tamarack, MN
Really Easy
Less than 15 mins
Pliers, Screw drivers

First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th ... Read more

Read less

Was this helpful?

microve stopped working

15 of 30 people found this instruction helpful.

Denice from Montgomery, AL
Really Easy
15 - 30 mins

Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise

Was this helpful?

Died while heating lasagna

9 of 17 people found this instruction helpful.

connie from madison, NC
Really Easy
Less than 15 mins

Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.

Was this helpful?