My Orders
15T20 Briggs and Stratton Engine - Overview
Models starting with 15T20
Click on the best match to narrow your results.
- 15T202 (0915-F8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T202/0915-F8 (15T202/0915F8, 15T202/0915 F8) Parts)
- 15T202 (0009-F8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T202/0009-F8 (15T202/0009F8, 15T202/0009 F8) Parts)
- 15T202 (0010-F8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T202/0010-F8 (15T202/0010F8, 15T202/0010 F8) Parts)
- 15T202 (0001-F8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T202/0001-F8 (15T202/0001F8, 15T202/0001 F8) Parts)
- 15T202 (0003-F1) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T202/0003-F1 (15T202/0003F1, 15T202/0003 F1) Parts)
- 15T202-0012-F1 Briggs and Stratton Engine (Engine)
- 15T202-0125-F8 Briggs and Stratton Engine (Engine)
- 15T202-0128-F8 Briggs and Stratton Engine (Engine)
- 15T202-0163-G8 Briggs and Stratton Engine (Engine)
- 15T202-0168-F8 Briggs and Stratton Engine (Engine)
- 15T202-0169-F8 Briggs and Stratton Engine (Engine)
- 15T202-0934-F8 Briggs and Stratton Engine (Engine)
- 15T205 (0130-G8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T205/0130-G8 (15T205/0130G8, 15T205/0130 G8) Parts)
- 15T205 (0165-F8) Briggs and Stratton Engine (Briggs & Stratton Small Engine Model 15T205/0165-F8 (15T205/0165F8, 15T205/0165 F8) Parts)
- 15T205-0126-G8 Briggs and Stratton Engine (Engine)
- 15T205-0170-F8 Briggs and Stratton Engine (Engine)
- 15T207-0013-F1 Briggs and Stratton Engine (Engine)
- 15T207-0162-F8 Briggs and Stratton Engine (Engine)
- 15T207-0920-F8 Briggs and Stratton Engine (Engine)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$33.95
Special Order
Puller-flywheel
Part #19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward d...Read moreuring repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.
Read less
$8.95
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
$49.95
Special Order
Brush Set
Part #497608
$7.95
Special Order
Bolt
Part #691119
$6.95
Special Order
Screw
Part #699233
This screw is a an original Briggs and Stratton part used in small engines. The durable brass screw is flanged with a hexagonal head. The screw is used to secure the oil sensor, and is sold individually.
$33.95
Special Order
Gear-Timing
Part #695087
$11.95
Special Order
Filter-a/c Foam
Part #493537S
Genuine Manufacturer Sourced replacement part used on a variety of Briggs and Stratton Engines. This filter adds a second layer of protection against airborne-dirt particle ingestion. This is a Foam Pre-Cleaner which is Sold Individually. Please note a Paper Filter and a Cover are both Sold Separately.
$7.95
Special Order
Cap-oil Fill
Part #281658S
This manufacturer approved replacement part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is utilized to keep the oil in the tank. Please note this durable plastic oil fill cap is sold individually.
$48.95
Special Order
Arrestor-spark
Part #399541
$11.95
In Stock
Kit-needle/seat
Part #398188
Genuine manufacturer approved carburetor needle valve for lawn and garden equipment engines. This item includes the seat. The needle valve opens and closes to control the flow of fuel into the carburetor. Make sure to disconnect the spark plug wire and drain all gasoline from the carburetor and fuel tank before starting a repair.
$33.95
Special Order
Cable-Starter
Part #690795
$6.95
Special Order
Washer-sealing
Part #271716
This authentic OEM sealing washer is designed for your lawn equipment to create a tight seal within the carburetor body, preventing fuel or air leaks. If you notice any signs of leaks, such as dripping fuel or hissing sounds, it may indicate a faulty or worn-out sealing washer. Additionally, you might be experiencing engine performance is...Read moresues like rough idling or difficulty starting. To replace the sealing washer, ensure that the machine is off and that the engine has cooled down. Remove the air breather cover and the filter itself, following the instructions provided in your user manual to access the carburetor. Depending on your specific equipment model, you may need to detach the springs from the carburetor choke mechanism, disconnect the fuel line and fuel tank, remove the choke lever, and detach the air breather base. Once you have located the carburetor, carefully unthread the main jet from the bottom of the carburetor bowl. Finally, slide off the old sealing washer, ensuring you take note of its positioning for accurate replacement. Please note that this sealing washer is sold individually.
Read less
Common Symptoms of models starting with 15T20
How this model fails, and the parts that fix it.
Will Not Start
Fixed by
these parts
these parts
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Parts fit like a glove
2 of 3 people
found this instruction helpful.
Removed pull start assembly down to the crank. Installed motor housing, motor fan & rewind assembly. All went real good.
Other Parts Used:
Was this helpful?
Thank you for voting!