1580-0 Briggs and Stratton Pressure Washer - Overview

Diagrams for 1580-0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
18oz 30w 4 Cycle Oil – Part Number: 100005
$8.95
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
Mount, Vibration – Part Number: 21217GS
$13.95
Special Order
Mount, Vibration
Part #21217GS
This is a genuine replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers from Briggs & Stratton and Snapper. The vibration mount fits between the engine and the frame assembly and is used to reduce vibration between the motor and frame. This item is sold as an individual replacement part.
O-Ring, Thermal By-Pass – Part Number: 93876GS
$6.95
Special Order
O-Ring, Thermal By-Pass
Part #93876GS
Gasket, Head – Part Number: A2069GS
$14.68
Special Order
Gasket, Head
Part #A2069GS
This is an authentic Briggs and Stratton replacement part manufactured for use with pressure washers. This gasket forms a seal between the pump head and inlet plate spacer. It is recommended to replace pressure washer gaskets when servicing the pump to ensure a proper seal when reassembling the pump. This head gasket is available as an individual replacement part.
PISTON, BY-PASS – Part Number: 95416GS
$6.95
Special Order
PISTON, BY-PASS
Part #95416GS
Washer, 8.4 X 22.2 X 3 – Part Number: 96796GS
$5.95
Special Order
Washer, 8.4 X 22.2 X 3
Part #96796GS
O-Ring Kit – Part Number: 705001
$34.95
Special Order
O-Ring Kit
Part #705001
This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.
Charger, 120vac, 13vdc Output, – Part Number: 84002790
$69.95
Special Order
Charger, 120vac, 13vdc Output,
Part #84002790
This battery charger is used with a variety of portable generators. It is supplied directly from original equipment manufacturer and it is sold individually. It is used to deliver power from an outlet to the unit. Please note that a weak or defective battery can damage the charger. Weak batteries are batteries with bad cells that would not hold charge. It is advised to test your batteries if you are unsure if the problem is in the charger or the batteries.
Screw, 10 X 0.62 Plastite – Part Number: B3311GS
$5.95
Special Order
Clamp, Hose – Part Number: 48031CGS
No Longer Available
Clamp, Hose
Part #48031CGS
Hose Clamp – Part Number: 48031GGS
No Longer Available
Hose Clamp
Part #48031GGS
O-Ring, 1.625" X 0.103 – Part Number: B2218GS
No Longer Available
O-Ring, 1.625" X 0.103
Part #B2218GS

Common Symptoms of the 1580-0

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had stripped thread had to rethread and install pump unloaded rebuild kit.
2 of 3 people found this instruction helpful.
  • Leonard from SAGINAW, MI
  • Very Difficult
  • More than 2 hours
The reinstall was the hardest because the amount of tension with the spring. Had to cobble something together to hold spring tension until I got the new nut plug started. To bad you don’t give instructions and or tools to help with the actual install.
Was this helpful?
Thank you for voting!