155450 Kenmore - Overview

Models starting with 155450

Click on the best match to narrow your results.

Parts for models starting with 155450

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip Bowl - 8 Inch – Part Number: WB32X106
$70.92
Special Order
Drip Bowl - 8 Inch
★★★★★
★★★★★
(1)
Part #WB32X106
This 8-inch chrome drip pan is designed to sit beneath the heating element on electric ranges, serving as a protective barrier that catches spills, drips, and food particles during cooking. Measuring approximately 9.5 inches in diameter and 1.5 inches in height, it is constructed from durable, chrome-plated steel for long-lasting performance and easy cleaning. By preventing residue buildup beneath the burners, it helps maintain a clean and efficient cooking surface. This drip pan is compatible with a variety of electric range models and is ideal for replacing worn, stained, or missing burner bowls. Installation is simple and requires no tools—just lift the element and place the pan underneath.
Read less
Drip Bowl - 6 Inch – Part Number: WB32X107
$19.95
Special Order
Drip Bowl - 6 Inch
★★★★★
★★★★★
(2)
Part #WB32X107
This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.
Older Style Surface Plug-In Block Kit – Part Number: 256711
No Longer Available
Older Style Surface Plug-In Block Kit
Part #256711
This older style terminal block kit with quick connect terminals is used with many of Whirlpool/Kenmore's brands of electric ranges.
NOT AVAILABLE – Part Number: N/P
No Longer Available
NOT AVAILABLE
Part #N/P
NUT, JET HOLDER, M22 X 1 – Part Number: 188978
No Longer Available
NUT 10-24 – Part Number: STD541010
No Longer Available
NUT 10-24
Part #STD541010
Switch knob – Part Number: K14691
No Longer Available
Switch knob
Part #K14691
Insulation – Part Number: K14699
No Longer Available
Insulation
Part #K14699
Thermostat knob – Part Number: K14688
No Longer Available
Thermostat knob
Part #K14688
Glass – Part Number: K14686
No Longer Available
Glass
Part #K14686
Handle – Part Number: K11823
No Longer Available
Handle
Part #K11823
Clip – Part Number: K14795
No Longer Available
Clip
Part #K14795
View More

Common Symptoms of models starting with 155450

How this model fails, and the parts that fix it.

Element will not heat
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Could not find the correct replacements (burners & drip pans)
13 of 21 people found this instruction helpful.
  • Barbara from JEFFERSON, GA
  • Very Easy
  • Less than 15 mins
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before an y other source. Knowledge & cost is also important to me & that need was met. Good job!
Read less
Was this helpful?
Thank you for voting!
Connector between element & wiring burnt
3 of 3 people found this instruction helpful.
  • David from Attleboro, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Really easy fix. Remove burner element, then burner basket.
Remove small Phillips screw on the rim of the cooktop opening for the burner. Next lift the cooktop and remove the wires from the plug-in (Long nose pliers are recommended but not necessary).
Next thing to do is examine the insulation on the wires - MAKE SURE IT IS 100 % INTACT! DO NOT CONTINUE IF THE WIRE INSULATION IS NOT IN GOOD CONDIITON - EXTREME FIRE HAZARD - CALL A PROFESSIONAL!
Reinstall the new plug-in in reverse order.
Read less
Was this helpful?
Thank you for voting!
Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.
10 of 25 people found this instruction helpful.
  • Jennifer from Saginaw, MI
  • Really Easy
  • Less than 15 mins
Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect!
Was this helpful?
Thank you for voting!
View More