1534 - Overview

Models starting with 1534

Click on the best match to narrow your results.

Parts for models starting with 1534

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
ELEMENT BAKE - RB147 – Part Number: WG02F05395
$135.45
In Stock
ELEMENT BAKE - RB147
★★★★★
★★★★★
(9)
Part #WG02F05395
This bottom oven bake element is designed for 30-inch electric ranges and ovens, delivering reliable and even heat for baking. Rated at 3000 watts and operating on 240 volts, it helps resolve common issues such as no heat, uneven heating, or a visibly damaged element. Installed at the base of the oven, it restores proper cooking performance when the original element fails. Always disconnect power before installation, and be sure to verify your appliance model to ensure proper fit.
Read less
Fluorescent Lamp/Bulb – Part Number: F26T8-CW-4
No Longer Available
Fluorescent Lamp/Bulb
Part #F26T8-CW-4
HINGE REG – Part Number: WG02L02131
No Longer Available
SWITCH INF.2600W - WB23M99 – Part Number: WG02F05772
No Longer Available
SWITCH INF.2600W - WB23M99
Part #WG02F05772
ELEMENT 8" 2400W - P1T23F – Part Number: WG02F05386
$140.65
In Stock
ELEMENT 8" 2400W - P1T23F
Part #WG02F05386
Leveling Leg – Part Number: WB2X8248
No Longer Available
Leveling Leg
Part #WB2X8248
Gasket – Part Number: WB2X2058
No Longer Available
Gasket
Part #WB2X2058
This genuine OEM oven door gasket is designed to create a tight, heat-resistant seal between the oven door and the cooking cavity. By preventing heat from escaping, it helps maintain consistent cooking temperatures and supports efficient oven operation. Replacing a worn, torn, or damaged gasket can resolve issues such as heat loss, uneven cooking, or longer preheat times, restoring proper performance with a simple, direct-fit installation.
Read less
FELT WASHER – Part Number: 2600108077
$5.95
Special Order
FELT WASHER
Part #2600108077
SPRING – Part Number: 1604611026
$5.95
Special Order
SPRING
Part #1604611026
ON/OFF SWITCH – Part Number: 1607200086
$45.53
Special Order
ON/OFF SWITCH
Part #1607200086
CORD – Part Number: 3604460555
$35.04
Special Order
CORD
Part #3604460555
This cord is a genuine OEM replacement part and is sold individually. Power Cord Specifications: 2 Wires. 18 Gauge. 2 Prongs. 6-1/2 Feet Long. It is constructed with thick insulation for long service life and a strong two-prong plug. This cord is compatible with the tools listed below. It can work for other applications and for other tools as well, but compatibility is not guaranteed. Installation of this part requires the new cord wires be stripped and to fit correctly into the wire terminals.
Read less
PLUNGER GUIDE – Part Number: 3609201338
$296.95
Special Order
PLUNGER GUIDE
Part #3609201338
View More

Exact Part matches for your search term

Screw – Part Number: 1534
No Longer Available
Screw
This part number matches the current model number 1534
Part #1534

Common Symptoms of models starting with 1534

How this model fails, and the parts that fix it.

Element will not heat
Fixed by
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The gasket needed to be replaced in top oven, it was brittle and broken.
19 of 28 people found this instruction helpful.
  • JoAnn from Auburn, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Read less
Was this helpful?
Thank you for voting!
Oven Gasket Worn and Brittle
7 of 8 people found this instruction helpful.
  • Karen from Yakima, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took oven door off. Removed screws that were holding oven insert. Pulled out oven insert. Removed old gasket. Installed new gasket. Push oven insert back. Installed screws. Replaced oven door.
Was this helpful?
Thank you for voting!
Gasket around rim of oven broke while cleaning
7 of 10 people found this instruction helpful.
  • Dorothy from Santa Rosa, CA
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Son-in-law unscrewed oven compartment; broken gasket was easy enough to remove and new gasket easy to replace; only problem was oven door would not shut tight. Tried shoving gasket harder into groove, tried turning on oven and heating new gasket to see if it would soften. Finally got it to close by pushing hard on left side of oven and inside light would at least go off and stay off.
Read less
Was this helpful?
Thank you for voting!
View More