Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barb
December 19, 2022
Had been running fine last week. Now, I turned the blower on and it makes a bit of a high-pitched sound, and only a little air blows from it. You would think that something was stuck in it. The flywheel moves freely. I took out all the screws on the housing but cannot open the housing to look inside. Your recommendations?
For model number 15130376
Hello Barb, thank you for reaching out. Washers attach the impeller to the body of the leaf blower. The impeller blades will be decentered if they become bent. This instability can cause noise while the motor is idling or cause the impeller blade to get stuck, resulting in overheating or a seized motor. A loose nut can cause a rattling noise when using your blower. The noise may be more pronounced while the blower is idling. If the impeller nut becomes lodged between the blade and the encasing, your engine may overheat and seize. If your impeller blade is bent, it can begin to rub against the sides. A piece of the blade may have broken off due to corrosion, thus causing a noise. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
