143976 Craftsman Engine - Overview

Models starting with 143976

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Spring-choke Return – Part Number: 590740
$15.95
Special Order
Spring-choke Return
Part #590740
Screw – Part Number: 590703
No Longer Available
Screw
Part #590703
Gasket-Crankcase – Part Number: 590608
No Longer Available
Gasket-Crankcase
Part #590608
Oil Pump Assembly – Part Number: 29914
No Longer Available
Oil Pump Assembly
Part #29914
Compression Spring – Part Number: 36482
No Longer Available
Compression Spring
Part #36482
Gasket – Part Number: 49-084
No Longer Available
Gasket
Part #49-084
Oil Seal – Part Number: 36010
No Longer Available
Oil Seal
Part #36010
Dog Sprng Rh – Part Number: 590412
No Longer Available
Dog Sprng Rh
Part #590412
Dust Seal Washer – Part Number: 631184
No Longer Available
Dust Seal Washer
Part #631184
Washer – Part Number: 590600
No Longer Available
Washer
Part #590600
Gasket – Part Number: 36048
No Longer Available
Gasket
Part #36048

Exact Part matches for your search term

SUPPORT – Part Number: 143976
No Longer Available
SUPPORT
This part number matches the current model number 143976
Part #143976
SUPPORT – Part Number: 00143976
$154.47
Special Order
SUPPORT
This part number matches the current model number 143976
Part #00143976
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad Camshaft made of plastic
2 of 2 people found this instruction helpful.
  • Dan from MILLSTONE TWP, NJ
  • Very Difficult
  • More than 2 hours
Original engine had camshaft made of plastic. Engine had a seal leak on shaft lost oil . Result was seized bearing and stripped camshaft. Ordered a replacement camshaft and gasket. Gasket came in a week after original due date and camshaft is NOT AVAILABLE. Didn't know that at original order. Followed up twice with operator, not ema il and got a non-answer answer. No idea when part will be available and requested a second contact and update. Same no idea reply. Result is a waste of my time with this company, will NOT use them again.
Was this helpful?
Thank you for voting!
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this helpful?
Thank you for voting!
Lost PartSelect Number PS9053486; Tecumseh 650898A screw
3 of 12 people found this instruction helpful.
  • Steven from FAIRVIEW, TN
  • Very Easy
  • Less than 15 mins
  • Socket set
I lost two of the screws that hold the plastic Lawn Boy cowling to the Tecumseh lv195ea engine. I just replaced the lost screws with the newly ordered screws.
Was this helpful?
Thank you for voting!