143945 Craftsman Engine - Overview

Models starting with 143945

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Spring-choke Return – Part Number: 590740
$15.95
Special Order
Spring-choke Return
Part #590740
Screw – Part Number: 590703
No Longer Available
Screw
Part #590703
End Cap – Part Number: 35461
No Longer Available
End Cap
Part #35461
Spring, Rewind – Part Number: 590619
No Longer Available
Spring, Rewind
Part #590619
Spacer-carburetor – Part Number: 590615
No Longer Available
Spacer-carburetor
Part #590615
Gasket-Crankcase – Part Number: 590608
No Longer Available
Gasket-Crankcase
Part #590608
Shutter – Part Number: 632590
No Longer Available
Shutter
Part #632590
Nut – Part Number: 632682
No Longer Available
Nut
Part #632682
Oil Seal – Part Number: 36010
No Longer Available
Oil Seal
Part #36010
Valve – Part Number: 32645A
No Longer Available
Valve
Part #32645A
Compression Spring – Part Number: 36482
No Longer Available
Compression Spring
Part #36482

Exact Part matches for your search term

PLATE – Part Number: 143945
No Longer Available
PLATE
This part number matches the current model number 143945
Part #143945
PLATE – Part Number: 00662244
$98.75
Special Order
PLATE
This part number matches the current model number 143945
Part #00662244
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad Camshaft made of plastic
5 of 9 people found this instruction helpful.
  • Dan from Millstone Twp, NJ
  • Really Easy
  • 30 - 60 mins
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do a nything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Was this helpful?
Thank you for voting!
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this helpful?
Thank you for voting!
Lost PartSelect Number PS9053486; Tecumseh 650898A screw
3 of 12 people found this instruction helpful.
  • Steven from FAIRVIEW, TN
  • Very Easy
  • Less than 15 mins
  • Socket set
I lost two of the screws that hold the plastic Lawn Boy cowling to the Tecumseh lv195ea engine. I just replaced the lost screws with the newly ordered screws.
Was this helpful?
Thank you for voting!