14383 Craftsman - Overview

Models starting with 14383

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Gasket-Float Bowl – Part Number: 27682
No Longer Available
Gasket-Float Bowl
Part #27682
Filter-a/c Foam – Part Number: 27987S
No Longer Available
Filter-a/c Foam
Part #27987S
This air cleaner element is supplied from original manufacturer. It is specially designed for use with Briggs and Stratton engines used on lawn and garden equipment. It is used to filter out dust from entering the carburetor and the engine. This filter element is made out of foam material and it is sold individually. Please note, the air cleaner cartridge is sold separately. Replacing this filter is a simple task that does not require any tools. • Unscrew the cover knob • Remove the cover • Remove old element • Secure the new element in place • Reassemble and test the unit
Cylinder Assembly – Part Number: 794850
No Longer Available
Cylinder Assembly
Part #794850
Spring, Rewind – Part Number: 590619
No Longer Available
Spring, Rewind
Part #590619
Spacer-carburetor – Part Number: 590615
No Longer Available
Spacer-carburetor
Part #590615
Screen – Part Number: 34479A
No Longer Available
Screen
Part #34479A
Extension Housing – Part Number: 33273A
No Longer Available
Extension Housing
Part #33273A
Screw – Part Number: 650788
No Longer Available
Screw
Part #650788
Dog Sprng Rh – Part Number: 590412
No Longer Available
Dog Sprng Rh
Part #590412
Screw – Part Number: 632281
No Longer Available
Screw
Part #632281
Valve – Part Number: 32645A
No Longer Available
Valve
Part #32645A

Exact Part matches for your search term

Control base – Part Number: 14383
No Longer Available
Control base
This part number matches the current model number 14383
Part #14383
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad Camshaft made of plastic
5 of 9 people found this instruction helpful.
  • Dan from Millstone Twp, NJ
  • Really Easy
  • 30 - 60 mins
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do a nything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Was this helpful?
Thank you for voting!
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this helpful?
Thank you for voting!