143033501 Craftsman Engine - Overview

Diagrams for 143033501

See every part. Know exactly what you need.

Parts for the 143033501

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gasket – Part Number: 36439
No Longer Available
Gasket
Part #36439
Washer – Part Number: 650691
No Longer Available
Washer
Part #650691
Screw, 8-32 X 1/2" – Part Number: 650139
No Longer Available
Screw, 8-32 X 1/2"
Part #650139
Element – Part Number: 31410
No Longer Available
Element
Part #31410
Breather Body – Part Number: 27666
No Longer Available
Breather Body
Part #27666
Rod – Part Number: 31334
No Longer Available
Rod
Part #31334
Screw – Part Number: 6021A
No Longer Available
Screw
Part #6021A
Belleville Washer – Part Number: 650815
No Longer Available
Belleville Washer
Part #650815
Screw (1/4-20x2-9/32) – Part Number: 650988
No Longer Available
Screw (1/4-20x2-9/32)
Part #650988
This manufacturer-approved screw is supplied directly from the original manufacturer. It is specially made for use with a variety of lawn and garden equipment. The screw is commonly utilized to secure the muffler. Over time it may wear out or it may get lost eventually requiring a replacement. This screw is made of high-quality metal and is sold individually. Refer to the diagram for your model to ensure the exact location and application. A wrench will be needed to secure or remove it.
Read less
Gasket – Part Number: 36437
No Longer Available
Gasket
Part #36437
O-ring – Part Number: 35499
No Longer Available
O-ring
Part #35499
Clip – Part Number: 35539
No Longer Available
Clip
Part #35539
View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Read less
Was this helpful?
Thank you for voting!
View More