1423W0A Roper Range - Overview

Diagrams for 1423W0A

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid Switch – Part Number: W10820036
$33.28
In Stock
Lid Switch
★★★★★
★★★★★
(7)
Part #W10820036
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
High Limit Thermostat – Part Number: WP303896
$92.28
In Stock
High Limit Thermostat
★★★★★
★★★★★
(2)
Part #WP303896
This thermostat is used for Canadian models only.
Lower Dishrack Kit – Part Number: W10311986
$223.97
In Stock
Lower Dishrack Kit
★★★★★
★★★★★
(2)
Part #W10311986
The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 22-inch x 21-inch. The rack is light gray in color with wheels included, lower fold down, and a flexrow retainer. This is a genuine OEM part.
Dishrack - Rack Only – Part Number: W11169039
$206.36
Special Order
Dishrack - Rack Only
★★★★★
★★★★★
(1)
Part #W11169039
A rusty or bent upper rack can make dishes hard to load and may block the spray. The replacement rack provides storage for smaller dishes and slides along the upper rails. First check the wheels, clips, adjusters, spray parts, and rail stops for wear. These items are not included with the rack. Match the rack to the complete appliance model and compare its size and mounting points. Remove all dishes, support the rack while sliding it out, and note where each part fits. After installation, make sure the rack moves freely and cannot leave the rails.
Broil Element – Part Number: 326795
No Longer Available
Broil Element
Part #326795
This five loop broil element has a hanger style mount.
Range Hex Nut – Part Number: WP112432
$10.95
In Stock
Range Hex Nut
Part #WP112432
10-32 hex - Sold Individually - Appliance originally takes 3 of this item.
Door Handle Spring – Part Number: 310197
No Longer Available
Door Handle Spring
Part #310197
USE WPL 660741 – Part Number: 301672
No Longer Available
USE WPL 660741
Part #301672
Timer – Part Number: 285675
No Longer Available
Timer
Part #285675
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
PANL-CNTRL – Part Number: 313370
No Longer Available
PANL-CNTRL
Part #313370
STIRRER COVER *** – Part Number: 313563
No Longer Available
STIRRER COVER ***
Part #313563
USE WPL 313958 – Part Number: 314132
No Longer Available
USE WPL 313958
Part #314132

Common Symptoms of the 1423W0A

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid closes, switch wouldn't turn on machine.
31 of 47 people found this instruction helpful.
  • Kenneth from Wilmington, IL
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Was this helpful?
Thank you for voting!
Washer would fill up, wash, then stop
22 of 31 people found this instruction helpful.
  • Glen from Plano, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Was this helpful?
Thank you for voting!
bottom rack was starting to rust away and we needed a new one
19 of 27 people found this instruction helpful.
  • pat from muncy, PA
  • Really Easy
  • Less than 15 mins
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
Was this helpful?
Thank you for voting!