1420 - Overview

Models starting with 1420

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Ring – Part Number: 229B2327GS
$15.95
Special Order
Ring
Part #229B2327GS
O-Ring – Part Number: 234B2327GS
$9.95
Special Order
O-Ring
Part #234B2327GS
Inlet Bolt – Part Number: 226B2327GS
$102.95
Special Order
Inlet Bolt
Part #226B2327GS
O-Ring – Part Number: 137B2327GS
$8.95
Special Order
O-Ring
Part #137B2327GS
Chemical Injection Kit – Part Number: 192914GS
No Longer Available
Chemical Injection Kit
Part #192914GS
It is a high-quality item that is supplied by the original equipment for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. The kit includes a fitting that allows a user to connect the hose that supplies the chemical cleaning solution. Unfortunately, over time components on your equipment may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams and the owners manual of your model for the correct installation of these parts. The kit includes one durable brass fittings, a metal ball, a spring and a rubber seal. To replace it, you will need a wrench set to remove the old fitting and secure the new one.
Valve,Thermal – Part Number: 195016GS
$43.95
Special Order
Valve,Thermal
Part #195016GS
18oz 30w 4 Cycle Oil – Part Number: 100005
$8.95
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
O-Ring – Part Number: 194434GS
$9.95
Special Order
O-Ring
Part #194434GS

Exact Part matches for your search term

lug Button 3/16`` (2) – Part Number: 1420
No Longer Available
lug Button 3/16`` (2)
This part number matches the current model number 1420
Part #1420
Washer – Part Number: 1420
No Longer Available
Washer
This part number matches the current model number 1420
Part #1420

Common Symptoms of models starting with 1420

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave oven blew fuse
27 of 43 people found this instruction helpful.
  • tad from tamarack, MN
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Was this helpful?
Thank you for voting!
The copper fitting on the chemical injection broke.
12 of 17 people found this instruction helpful.
  • Carl from ARCADIA, FL
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in back wards you pressure will fed directly into your chemical container!!
Was this helpful?
Thank you for voting!
microve stopped working
15 of 30 people found this instruction helpful.
  • Denice from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Was this helpful?
Thank you for voting!