1352W06 Roper Range - Overview

Diagrams for 1352W06

See every part. Know exactly what you need.

Parts for the 1352W06

$69.25

Surface Burner Element Switch, Large Burner

★★★★★

(48)

Part #WP3149400

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with elec...Read more

Read less

$66.88

2 Piece Broiler Pan

★★★★★

(2)

Part #4396923

This broiler pan and roasting rack set features a two-piece design that allows fat to drain away for cleaner cooking and reduced splatter. Made with a durable, high-heat resistant porcelain finish, it offers reliable performance and easy cleanup. Measuring approximately 16 3/4 inches long by 12 3/4 inches wide and 1 3/4 inches high, it provides a practical solution for everyday broiling and roasting.

$98.67

Bearing and Seal Kit

★★★★★

(1)

Part #279264

This front bearing and seal kit comes with the adhesive.

$59.35

Surface Element Switch

★★★★★

(2)

Part #W10900107

Heater Wire - 240V

★★★★★

(1)

Part #WPY311946

Made for use with older model Maytag brand series 06 Halo of Heat style electric clothes dryers, this pre-stretched heating element coil carries 240 volts.

Broil Element

Part #326795

This five loop broil element has a hanger style mount.

$20.24

FUSE

Part #W10856869

Sold individually.

$10.95

Range Hex Nut

Part #WP112432

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$39.99

Thermostat Knob

Part #WPY0310527

SPRING WAS

Part #312073

$9.60

Hinge

Part #WP238456

$10.46

Dryer Door Hinge Left Side

Part #WP238460

Manuals & Care Guides for 1352W06

Click to download

Install

Installation Instructions

(0.59MB)

Common Symptoms of the 1352W06

How this model fails, and the parts that fix it.

Element will not heat

Oven not heating evenly

Fixed by
these parts

Show All

Videos related to models starting with 1352W06

Watch our pros, then fix it yourself.

Replacing the Surface Burner Element Switch, Large Burner

Replacing the Bearing and Seal Kit

Replacing the 2 Piece Broiler Pan

Replacing the Heater Wire - 240V

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

the element did not turn compleatly off, the on light stayed on.

89 of 109 people found this instruction helpful.

chaz from fairplay, CO
Easy
15 - 30 mins
Screw drivers

removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. re ... Read more

Read less

Was this helpful?

Burner would go high without warning

60 of 63 people found this instruction helpful.

John from Clinton, CT
Easy
15 - 30 mins
Pliers, Screw drivers

We felt the only possible problem could be the switch assembly. I removed the switch panel, removed the wires from the old switch, one at a time, removed the old switch assembly and installed the new switch assembly. The extended stem did have to be snapped off (per your instructions) and that too was a very simple task.

Was this helpful?

Left front burner would not adjust heat downward

35 of 40 people found this instruction helpful.

ALTON from ROUND ROCK, TX
Easy
15 - 30 mins
Screw drivers

Pull unit away from wall.
Unplug power
remove topmost four screws from rear metal cover
Pull knob off switch shaft.
Remove two screws holding switch to panel.
Break off shaft of new switch to correct length.
Remove each wire from old switch and attach to Corresponding lug on new switch.
Reattach the new ... Read more

Read less

Was this helpful?