1348A46 Roper Range - Overview

Diagrams for 1348A46

See every part. Know exactly what you need.

Parts for the 1348A46

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Round Carborundum Oven Igniter – Part Number: 4342528
$85.45
In Stock
Range Round Carborundum Oven Igniter
★★★★★
★★★★★
(4)
Part #4342528
This round style carborundum gas oven igniter has 10 inch lead and amperage range between 2.5 and 3.0 amps. Be very careful when handling this igniter as it is very fragile. Please note - The bracket and screws are not included. This part will not replace the flat style igniters. Also known as bake and broil igniter.
DISCONTINUED – Part Number: 4331308
No Longer Available
DISCONTINUED
Part #4331308
USE WPL 4389958 – Part Number: 4389497
No Longer Available
USE WPL 4389958
Part #4389497
DISCONTINUED – Part Number: 4328835
No Longer Available
DISCONTINUED
Part #4328835
DISCONTINUED – Part Number: 4329608
No Longer Available
DISCONTINUED
Part #4329608
DISCONTINUED – Part Number: 4329749
No Longer Available
DISCONTINUED
Part #4329749
DISCONTINUED – Part Number: 4332290
No Longer Available
DISCONTINUED
Part #4332290
DISCONTINUED – Part Number: 4333519
No Longer Available
DISCONTINUED
Part #4333519

Common Symptoms of the 1348A46

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The lower burner would not ignite.
80 of 87 people found this instruction helpful.
  • Mark from Rego Park, NY
  • Easy
  • Less than 15 mins
  • Screw drivers, Socket set
First I removed the oven racks. Then I loosened the two screws in the back of the oven floor and figured out how to remove it. Then I loosened the two screws at the front of the diverter and, with some pushing and pulling and twisting, was able to get that to come out, too. Then I tried lighting the oven and noticed that the igniter wa s not glowing. When I saw that the upper (broiler) burner was working fine, I hoped that the problem was the lower igniter itself. I checked the wires and they seemed fine. I saw that two bolts held the igniter onto its bracket, so with a socket wrench (which size I got right on the first guess!) I removed those bolts and the igniter came loose. I found the connecter for the wires when I removed the drawer under the oven and was able to pull it apart easily. The igniter came out completely. There was nothing unusual about it, but I decided to take a chance and order a new one, hoping that replacing it would solve the problem. I put the rest of the oven together and waited. About three days later the part arrived (it was sent on a holiday; FedEx is soooo much better than USPS). I retraced the steps of taking the oven apart, put the two bolts into the new igniter to attach it to the bracket, and went back underneath behind the drawer to connect the wires. Then came the moment of truth: I tried turing on the oven. I held the button down to keep the light off, and after a few seconds I saw it: IT GLOWED!! It worked!! After yelling a satisfying "YEAH!!," I turned it off, put back the drawer, the diverter (more pulling and pushing and twisting), and the oven floor. Now it's all working perfectly and it took a very short time to fix. And a little luck that the problem was with such a simple part.
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't light (gas)
12 of 14 people found this instruction helpful.
  • David from El Paso, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
Removed racks and floor in oven, exposing ignitor assembly. Disconnected 2 wires at electrical connector plug. Removed 2 screws holding ignitor in place, removed bad ignitor, installed new ignitor in reverse order. Tested for ignition, all worked fine.
Was this helpful?
Thank you for voting!
oven would not ignite
11 of 12 people found this instruction helpful.
  • Gary from Caldwell, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
removed broiler pan
removed oven bottom plate
removed burner cover
unplug and remove igniter
reinstall igniter
clean and reassemble
Was this helpful?
Thank you for voting!
View More