1340001 Whirlpool Microwave - Overview

Diagrams for 1340001

See every part. Know exactly what you need.

01 - Page 1

Parts for the 1340001

$16.37

Ceramic Fuse - 20 amp

★★★★★

(1)

Part #WPM0805101

This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.

$10.40

Dryer Screw

Part #WP90767

This screw is sold individually.

$63.75

Capacitor

Part #59001651

SUB 38806P01

Part #M16D92

USE MAC A4539625

Part #M1D367

USE MAC M0287001

Part #M1D625

USE MAC M0200316

Part #M1D731

SUB 5524122001

Part #M2D579

SUB 40370P01

Part #M2D584

SUB 38321P01

Part #M2D664

SUB R0163249

Part #M2D730

SUB R0130737

Part #M35D47

Common Symptoms of the 1340001

How this model fails, and the parts that fix it.

Won’t turn on

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

microwave oven blew fuse

27 of 43 people found this instruction helpful.

tad from tamarack, MN
Really Easy
Less than 15 mins
Pliers, Screw drivers

First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th ... Read more

Read less

Was this helpful?

microve stopped working

15 of 30 people found this instruction helpful.

Denice from Montgomery, AL
Really Easy
15 - 30 mins

Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise

Was this helpful?

Died while heating lasagna

9 of 17 people found this instruction helpful.

connie from madison, NC
Really Easy
Less than 15 mins

Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.

Was this helpful?