1335*1A Roper Range - Overview

Diagrams for 1335*1A

See every part. Know exactly what you need.

Parts for the 1335*1A

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid Switch – Part Number: W10820036
$33.28
In Stock
Lid Switch
★★★★★
★★★★★
(7)
Part #W10820036
Keep your washer or dryer running safely with this easy-to-install lid or door switch kit. It stops the machine from working when the door is open, helping prevent spills and accidents. Compatible with many models, this small but important part fits neatly inside your appliance and comes with everything you need for installation. Just unplug your machine, swap out the old switch, and you're good to go. It’s about 2.5 inches long and blends in with most interiors.
Read less
Blower Belt – Part Number: WP691371
$70.12
In Stock
Blower Belt
★★★★★
★★★★★
(3)
Part #WP691371
If your dryer isn’t drying clothes like it used to or making strange noises, this blower belt might be the fix. It connects the motor to the blower wheel, helping move air through the drum so clothes dry faster. Made to fit select Whirlpool models, it’s tough and reliable. Just unplug your dryer before installing and check your model number to make sure it’s the right part!
SERVICE MOTOR-60 CYCLE (PRODUCTION MOTORS 296086, 295976 OR 295977) – Part Number: 299761
No Longer Available
xInstallation Guide – Part Number: 329414
No Longer Available
xInstallation Guide
Part #329414
Door Handle – Part Number: WP311563
$130.22
Special Order
Door Handle
Part #WP311563
Screws NOT included.
USE WPL 4334894 – Part Number: 326047
No Longer Available
USE WPL 4334894
Part #326047
F6507 Models – Part Number: 327084
No Longer Available
F6507 Models
Part #327084
xInstallation Instructions – Part Number: 300668
No Longer Available
xLeg Levelers (4 Req) – Part Number: 326052
No Longer Available
xLeg Levelers (4 Req)
Part #326052
STIRRER COVER *** – Part Number: 313563
No Longer Available
STIRRER COVER ***
Part #313563
Fixture Wire Lead With 1/4`` Faston & Piggyback Terminals (Black With 1/4`` Faston & Eyelet Terminal – Part Number: 291284
No Longer Available
Left – Part Number: 329654
No Longer Available
Left
Part #329654
View More

Common Symptoms of the 1335*1A

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Show All

Videos related to the 1335*1A

Watch our pros, then fix it yourself.

Replacing the Lid Switch

Replacing the Lid Switch

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lid closes, switch wouldn't turn on machine.
31 of 47 people found this instruction helpful.
  • Kenneth from Wilmington, IL
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers, Socket set
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
Read less
Was this helpful?
Thank you for voting!
Washer would fill up, wash, then stop
22 of 31 people found this instruction helpful.
  • Glen from Plano, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
Read less
Was this helpful?
Thank you for voting!
One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door
17 of 21 people found this instruction helpful.
  • Xiaobin from Cordova, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.
Was this helpful?
Thank you for voting!
View More