13338-1 General Electric Range - Overview

Diagrams for 13338-1

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
ELEMENT BAKE - RB147 – Part Number: WG02F05395
$135.45
In Stock
ELEMENT BAKE - RB147
★★★★★
★★★★★
(9)
Part #WG02F05395
This bottom oven bake element is designed for 30-inch electric ranges and ovens, delivering reliable and even heat for baking. Rated at 3000 watts and operating on 240 volts, it helps resolve common issues such as no heat, uneven heating, or a visibly damaged element. Installed at the base of the oven, it restores proper cooking performance when the original element fails. Always disconnect power before installation, and be sure to verify your appliance model to ensure proper fit.
Fluorescent Lamp/Bulb – Part Number: F26T8-CW-4
No Longer Available
Fluorescent Lamp/Bulb
Part #F26T8-CW-4
HINGE REG – Part Number: WG02L02131
No Longer Available
SWITCH INF.2600W - WB23M99 – Part Number: WG02F05772
No Longer Available
SWITCH INF.2600W - WB23M99
Part #WG02F05772
ELEMENT 8" 2400W - P1T23F – Part Number: WG02F05386
$140.65
In Stock
ELEMENT 8" 2400W - P1T23F
Part #WG02F05386
Leveling Leg – Part Number: WB2X8248
No Longer Available
Leveling Leg
Part #WB2X8248
Gasket – Part Number: WB2X2058
No Longer Available
Gasket
Part #WB2X2058
This genuine OEM oven door gasket is designed to create a tight, heat-resistant seal between the oven door and the cooking cavity. By preventing heat from escaping, it helps maintain consistent cooking temperatures and supports efficient oven operation. Replacing a worn, torn, or damaged gasket can resolve issues such as heat loss, uneven cooking, or longer preheat times, restoring proper performance with a simple, direct-fit installation.
WHEEL DRAWER – Part Number: WB2M528
No Longer Available
WHEEL DRAWER
Part #WB2M528
LIGHT PILOT – Part Number: WB8M216
$22.20
Special Order
LIGHT PILOT
Part #WB8M216
WINDOW – Part Number: WB36X526
No Longer Available
WINDOW
Part #WB36X526
GASKET – Part Number: WB2X3163
$24.92
In Stock
GASKET
Part #WB2X3163
LOCKWASHER – Part Number: WB1M181
No Longer Available
LOCKWASHER
Part #WB1M181

Common Symptoms of the 13338-1

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The gasket needed to be replaced in top oven, it was brittle and broken.
19 of 28 people found this instruction helpful.
  • JoAnn from Auburn, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Was this helpful?
Thank you for voting!
Oven Gasket Worn and Brittle
7 of 8 people found this instruction helpful.
  • Karen from Yakima, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Took oven door off. Removed screws that were holding oven insert. Pulled out oven insert. Removed old gasket. Installed new gasket. Push oven insert back. Installed screws. Replaced oven door.
Was this helpful?
Thank you for voting!
Gasket around rim of oven broke while cleaning
7 of 10 people found this instruction helpful.
  • Dorothy from Santa Rosa, CA
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Son-in-law unscrewed oven compartment; broken gasket was easy enough to remove and new gasket easy to replace; only problem was oven door would not shut tight. Tried shoving gasket harder into groove, tried turning on oven and heating new gasket to see if it would soften. Finally got it to close by pushing hard on left side of oven and inside light would at least go off and stay off.
Was this helpful?
Thank you for voting!