1320-98 (Type 5) Black and Decker - Overview

Included in part number 51404-03

This item has been sourced from the original manufacturer to be used with drills from DeWalt and Black & Decker. The metal key fits into the slot on the spindle shaft and aligns with the keyway in the gear. This item allows the shaft and gear to rotate in unison. This item is sold as an individual replacement part.

Includes part numbers 49082-00, 51401-00, 21822-00 and 51402-00

Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 605511-00

This gear is an OEM direct from DeWalt. The metal gear is designed for use with many electric drill devices. The gear helps to power the spindle, and is sold individually. You will need a screwdriver for the replacement.

Genuine Dewalt/Black & Decker replacement part. includes 1 Carbon Brush with wire lead and brush spring attached. 2 Brushes are needed for the tools listed below. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carb...Read moreon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.