1304 - Overview

Models starting with 1304

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heat Resistant Adhesive – Part Number: W10841140
$29.65
In Stock
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Gasket-breather – Part Number: 27549S
$6.95
Special Order
Gasket-breather
Part #27549S
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and Toro equipment. It is made with durable composite material and it is sold individually. Over time gaskets tend to get compressed and deteriorate, eventually requiring replacement.
Gasket-air Cleaner – Part Number: 271139S
$6.95
Special Order
Gasket-air Cleaner
Part #271139S
Engine Air Cleaner Cartridge Filter – Part Number: 396424S
$26.95
Special Order
Kit-bushing/seal – Part Number: 297565
$35.95
Special Order
Kit-bushing/seal
Part #297565
Screw – Part Number: 691685
$6.95
Special Order
Screw
Part #691685
Float-Carburetor – Part Number: 293477
$55.95
Special Order
Float-Carburetor
Part #293477
Cap-oil Fill – Part Number: 281658S
$7.95
Special Order
Cap-oil Fill
Part #281658S
This manufacturer approved replacement part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is utilized to keep the oil in the tank. Please note this durable plastic oil fill cap is sold individually.
Kit-Oil Gard – Part Number: 398182
$147.95
Special Order
Kit-Oil Gard
Part #398182
This oil guard kit helps manage oil flow and containment within the system. Designed for durability, it supports proper lubrication and cleaner operation.

Exact Part matches for your search term

CASSEROLE W/LID-COPP – Part Number: 1304
No Longer Available
CASSEROLE W/LID-COPP
This part number matches the current model number 1304
Part #1304
Adapter – Part Number: 1304
No Longer Available
Adapter
This part number matches the current model number 1304
Part #1304

Common Symptoms of models starting with 1304

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
microwave oven blew fuse
27 of 43 people found this instruction helpful.
  • tad from tamarack, MN
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th e help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Was this helpful?
Thank you for voting!
5 HP Briggs and Stratton chipper shredder - no spark
19 of 26 people found this instruction helpful.
  • Thomas from ALFRED, ME
  • Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this helpful?
Thank you for voting!
microve stopped working
15 of 30 people found this instruction helpful.
  • Denice from Montgomery, AL
  • Really Easy
  • 15 - 30 mins
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Was this helpful?
Thank you for voting!