13-3069-10-02 Tappan Cooktop - Overview

Sections of the 13-3069-10-02

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
ELEMENT – Part Number: 318198834
ELEMENT
PartSelect #: PS1528763
Manufacturer #: 318198834
This 8-inch radiant burner heats evenly under your range’s glass top, making cooking more reliable. It’s rated at 2200 watts and is great for everyday tasks like boiling or simmering. If your burner i...
$223.71
  In Stock
Order within the next 12 hrs and your part ships today!
Bushing – Part Number: 318148900
Bushing
PartSelect #: PS899886
Manufacturer #: 318148900
  No Longer Available
Surface Burner Control Knob – Part Number: 3051596
Surface Burner Control Knob
PartSelect #: PS434440
Manufacturer #: 3051596
Sold Individually. This black knob accepts a double-flat shaft.
  No Longer Available
USE WCI 5308017080 – Part Number: 5303015702
USE WCI 5308017080
PartSelect #: PS453556
Manufacturer #: 5303015702
  No Longer Available
ELEMENT-SURFACE – Part Number: 3204913
ELEMENT-SURFACE
PartSelect #: PS446778
Manufacturer #: 3204913
  No Longer Available
ELEMENT – Part Number: 3204914
ELEMENT
PartSelect #: PS446779
Manufacturer #: 3204914
  No Longer Available
TRIM – Part Number: 3204921
TRIM
PartSelect #: PS446786
Manufacturer #: 3204921
  No Longer Available
COVER-ACCESS – Part Number: 3051887
COVER-ACCESS
PartSelect #: PS434605
Manufacturer #: 3051887
  No Longer Available
USE WCI 5308017080 – Part Number: 3015182
USE WCI 5308017080
PartSelect #: PS432672
Manufacturer #: 3015182
  No Longer Available
SPRING – Part Number: 3015696
SPRING
PartSelect #: PS432874
Manufacturer #: 3015696
  No Longer Available
SUPPORT-ELEMENT – Part Number: 3015705
SUPPORT-ELEMENT
PartSelect #: PS432881
Manufacturer #: 3015705
  No Longer Available
LIGHT-INDICATOR ROU – Part Number: 3015699
LIGHT-INDICATOR ROU
PartSelect #: PS432877
Manufacturer #: 3015699
  No Longer Available

Common Symptoms of the 13-3069-10-02

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rf burner was not working
First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the three wires, put the hold down spring back in place, lowered the stove top and installed the 2 screws. JOB DONE
Parts Used:
ELEMENT
  • Neil from Jessup, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
34 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!