1199058813 Kenmore Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal Block Kit – Part Number: 5303935058
$20.88
In Stock
Terminal Block Kit
★★★★★
★★★★★
(45)
Part #5303935058
This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.
Drip Bowl - 8" – Part Number: 316048413
$19.75
In Stock
Drip Bowl - 8"
★★★★★
★★★★★
(18)
Part #316048413
This drip bowl is located beneath the element and catches any spills. It is sold individually and has a diameter of approximately 10 inches.
Chrome Drip Bowl - 6" – Part Number: 316048414
$18.65
In Stock
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(20)
Part #316048414
This drip bowl is sold individually. This part is located beneath the element and catches spills from cooking.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Main Terminal Block Kit – Part Number: 5304409888
$48.78
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(11)
Part #5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
Surface Element - 8 Inch - 220V – Part Number: 316442300
$89.29
In Stock
Surface Element - 8 Inch - 220V
★★★★★
★★★★★
(12)
Part #316442300
The coil burner element is eight inches in diameter. It has four turns, 220 volts and looped terminal ends. The coil burner element provides heat to the cooking surface on your range. You might need to replace this part if your element is not heating. It might have shorted out around the coil or the terminal block; you can test the coil to see if the burner or the switch may be at fault. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part and is sold individually.
Surface Element - 6 Inch – Part Number: 318372210
$45.86
In Stock
Surface Element - 6 Inch
★★★★★
★★★★★
(6)
Part #318372210
Sold individually. This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.
Oven Light Socket – Part Number: 316116400
$75.74
In Stock
Burner Switch Kit – Part Number: 5303935086
$72.50
In Stock
Burner Switch Kit
★★★★★
★★★★★
(8)
Part #5303935086
This switch controls the stove top surface burner.
Leveling Leg – Part Number: 318175510
$43.37
In Stock
Leveling Leg
Part #318175510
Sold individually.
Screw - Flat Head – Part Number: 134156200
$30.95
In Stock
Screw - Flat Head
Part #134156200
Sold individually.
Hinge - Right Side – Part Number: 318348800
No Longer Available
Hinge - Right Side
Part #318348800

Common Symptoms of the 1199058813

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cord was not tightened enough by delivery crew.
109 of 174 people found this instruction helpful.
  • Timothy from Spring Valley, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Was this helpful?
Thank you for voting!
Oven light receptacle broken - bulb base broke off
69 of 117 people found this instruction helpful.
  • Paul from Spokane Valley, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Was this helpful?
Thank you for voting!
Old pans/bowls were corroded
48 of 55 people found this instruction helpful.
  • John from Nisswa, MN
  • Really Easy
  • Less than 15 mins
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Was this helpful?
Thank you for voting!