1175 Black and Decker Electric Drill - Overview

This is a genuine OEM supplied replacement part designed for use with drills/drivers. This screw helps to secure the chuck to the unit. This is a reverse thread, oval-head Torx screw, made out of metal and it is sold individually. Requires a Torx screwdriver to install or remove this screw.

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most...Read more commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.

This is a genuine OEM sourced part that is intended to be used with gauge shears, grinders, joiners, drywall scruguns, screwdrivers, and holguns from Black & Decker and DeWalt. The metal contact strip is part of the motor assembly. This item is used to transfer electricity from the switch to the brush ring. This item is sold as an individual replacement part.

This replacement 10 foot power cord is specially produced for Black and Decker and Dewalt power tools. It is designed to connect to a standard US outlet supplying power to the tool. Please note one rubber insulated cord is included per order, the cord protector is not included it is sold separately. To complete this repair you will need a screwdriver.

This is an authentic Black & Decker replacement part. The terminal is designed by the manufacturer for use in drills, screwdrivers, and shears. This part is made of metal, and is used to create an electrical connection within the machine. You may require a screwdriver or Allen wrench and pliers when replacing this part. This item is sold individually. Included in part number 450562-00

This item is supplied directly from original equipment manufacturer. It is a very common accessory used with a variety of Black & Decker as well as Dewalt drills. This rubber holder helps user to secure chuck key for easy access. Includes one (1) chuck key holder per order. Please note, chuck key itself is sold separately.

Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces frictio...Read moren. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 605511-00

This is an authentic replacement part that is OEM sourced to be used with circular saws, drills, sanders, cut-off tools, rotary hammers, and planers. This screw is used with different types of power tools and the application of the screw varies depending on the model of equipment. Please see your model's diagram to confirm the screw's compatibility and usage. This item is available as an individual replacement part.

This is an authentic manufacturer sourced replacement part designed for use with a variety of drills. This chuck key is specially designed to tighten and loosen the jaws of a drill chuck. It is made out of metal and it is sold individually.