This is a genuine replacement part that is OEM sourced to be used with lawnmower engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the body of the crankcase an...
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$5.95
In Stock
Order within the next 12 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
March 30, 2025
engine wont start replaced spark plug and coil still no spark
For model number 114982-0184-01
Hi John,
Thank you for your question. If the engine will not start and you have replaced both the ignition coil and the spark plug, check the spark plug gap to make sure it is correct. If the gap is fine, make sure that the engine as adequate and fresh fuel. If the fuel has been sitting in the tank for a long period of time, it can clog the carburetor. If it is clogged, it will need to cleaned. Also check the seat and kill switches to see if they operating normally. If they are fine, you may have a defective spark plug or ignition coil and you will need to check to see which part is causing the issue. We hope this helps!
