113170330 Craftsman Utility Vacuum - Overview
Sections of the 113170330
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Nozzle
PartSelect #: PS9901317
Manufacturer #: 16933
This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with wet/dry vacuums. The plastic nozzle is an accessory attachment that connects to the ho...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over the end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Parts Used:
-
Gary from WILLMAR, MN
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!