111P02 (0015-F1) Briggs and Stratton Engine - Overview

Diagrams for 111P02

See every part. Know exactly what you need.

Parts for the 111P02

$13.95

Seal-oil

Part #399781S

This is an authentic replacement part manufactured for use with small engines. Seals can deteriorate overtime, and it is recommended to replace worn seals when servicing an engine. This seal is the lower seal in the engine's sump, the seal is sold individually.

$5.95

Key-flywheel

Part #222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

$15.95

Pin-piston/std

Part #298909

$5.95

Engine Spark Plug Terminal

Part #493880S

This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.

$23.95

Filter-air Cleaner Ca

Part #795066

This high quality replacement air cleaner cartridge is specially designed for use with Briggs and Stratton engines. It is an authentic OEM sourced item, not an aftermarket equivalent. It is utilized to filter out dust and debris from contaminating the carburetor and the engine. This filter is made from pleated paper in a plastic case and ...Read more

Read less

$22.95

Crank-Governor

Part #798327

$12.95

Retainer-E Ring

Part #795094

$20.95

Gasket-cylinder Head

Part #796475

This is an authentic replacement part manufactured for use with small engines. The cylinder head gasket forms a seal between the cylinder head, and cylinder. It is recommended to replace gaskets when servicing the cylinder head to ensure a good seal when it is reassembled. This cylinder head gasket is sold individually.

$10.95

Retainer-valve

Part #692194

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.

$47.95

Fan-flywheel

Part #796614

$6.95

Lawn Mower Starter Rope Grip

Part #281434S

$15.95

Link-mechanical Gover

Part #796657

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Bought Troy Built pressure Washer at garage Sale for $30.00 leaked fuel

2 of 3 people found this instruction helpful.

Laird from North Las Vegas, NV
Difficult
More than 2 hours
Nutdriver, Pliers, Screw drivers, Socket set

I have a solid understanding of small engines. This pressure washer was used twice in 2013, when purchased. Sat in a garage for a couple of years with gas in tank and carburetor. Owner was moving and after 7 years of moving it around he sold it at a garage sale.
I took it home and took off gas tank and thoroughly cleaned it. Then we ... Read more

Read less

Was this helpful?

The exhaust system just fell off the motor

1 person found this instruction helpful.

Darrel from SARASOTA, FL
Very Difficult
30 - 60 mins
Nutdriver, Screw drivers

I ordered the parts as there were only three screws and two bolts that needed to come out and then thenew ones go back in. Everything went just as planned...….well except the two bolts that where included by Briggs and Stratton appear to be 1/8-1/4" too short and now both of the threaded holes in the engine are now stripped and the quick ... Read more

Read less

Was this helpful?

Screw in new dipstick, check oil level

5 of 18 people found this instruction helpful.

Kim from KENNER, LA
Very Easy
Less than 15 mins

Very well

Was this helpful?