11086793 Kenmore Washer - Overview

Diagrams for 11086793

See every part. Know exactly what you need.

Parts for the 11086793

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Screen – Part Number: WP96160
$18.65
In Stock
Washer Screen
Part #WP96160
Found on the water inlet valve.
Water Inlet Valve – Part Number: 358277
$109.16
In Stock
Water Inlet Valve
Part #358277
This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.
8-18 X .625 TR CR AB – Part Number: W11693756
$27.28
In Stock
8-18 X .625 TR CR AB
Part #W11693756
Sold individually.
DISCONTINUED – Part Number: 350527
No Longer Available
DISCONTINUED
Part #350527
DIAPHRAGM – Part Number: 352515
No Longer Available
DIAPHRAGM
Part #352515
GUIDE, SOLENOID – Part Number: 352516
No Longer Available
GUIDE, SOLENOID
Part #352516
SPRING, ARMATURE – Part Number: 352519
No Longer Available
SPRING, ARMATURE
Part #352519
No Longer Available – Part Number: NLA
No Longer Available
No Longer Available
Part #NLA
This part is discontinued from the manufacturer and is no longer available to purchase.

Common Symptoms of the 11086793

How this model fails, and the parts that fix it.

No hot or cold water
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replacement of the water inlet vaqlve
11 of 14 people found this instruction helpful.
  • William from Chester, NJ
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
First I disconnected the inlet hoses. After lifting up the cover the electrical wires were marked and disconnected from the old valve. Next the short hose from the old valve to the tub was removed. Then the old valve was removed from the washing machine by removal of two mounting screws. The new valve was installed in the reverse orde r. New hose clamps were installed on the short hose from the valve to the tub. New washers were installed on the hoses which connected to the valve. A test was made to check for any leaks.
Read less
Was this helpful?
Thank you for voting!
Loss of cold water
8 of 10 people found this instruction helpful.
  • David from Powell, OH
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
Removed the top latches with a nut driver. Removed the washing machine top. Used a nut driver to remove the valve. Used pliers to remove and replace the outlet hose clamp. Used pliers to remove and replace inlet hoses.

I have kept this washer and dryer running for 27 years now by replacing parts. I was going to replace them thi s time but for a $20 part they still run ok. I bet I can use the old valve for a garden irrigation project too !
Read less
Was this helpful?
Thank you for voting!
Bad water valve
  • James from Lewisville, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
Oredered late Friday afternoon. Got part Monday afternoon.thanks
Was this helpful?
Thank you for voting!
View More