11080094 Kenmore Washer - Overview

Diagrams for 11080094

See every part. Know exactly what you need.

GEARCASE AND BRAKE

Parts for the 11080094

$14.25

Washer Shaft Seal

★★★★★

(1)

Part #WP91939

Transmission shaft seal.

$16.95

Washer Ringwire

Part #W11033823

This is part of the Basket Drive and found under the Brake Lining parts.

$39.22

Washer V-Style Cogged Tooth Pump Belt

★★★★★

(3)

Part #WP95405

$13.95

BEARING

Part #285205

$9.85

Washer Nut

Part #WP358160

This serrated nut is used for many clothes dryers. It is less than an inch long, and is made entirely of metal.

BAR-CAM

Part #18642

BULK OF 100 PCS.

Wig Wag Assembly - old style

Part #89814

A Wig Wag assembly is also known as a Transmission Shifting Coil Set. This old style wig wag assembly consists of a control magnet, two plungers, cam bar guides, rivets, and speed nuts. Use it for your Whirlpool/Kenmore brand washing machine.

SPRING-BAR

Part #94726

GASKET

Part #95089

BULK OF 50 PCS.

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

CAM, BAR SPIN

Part #350532

WASHER, TRUST

Part #353320

Common Symptoms of the 11080094

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

It was the heat safety switch in the old drive motor

2 of 3 people found this instruction helpful.

Andrew from HATTIESBURG, MS
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward

Was this helpful?

Washer Had A Continuous Moan And Vibration

Roger from Millis, MA
Really Easy
30 - 60 mins
Nutdriver, Wrench set

I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th ... Read more

Read less

Was this helpful?