11071632610 Kenmore Dryer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer Repair Kit – Part Number: 4392067
$56.05
In Stock
Dryer Repair Kit
★★★★★
★★★★★
(201)
Part #4392067
This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings, and one washer. This universal maintenance kit is an all-encompassing kit for fixing a noisy dryer, among other symptoms, but noisy being the most common. It is compatible with 27-inch wide dryers built from 1965 onwards. Be sure to disconnect the dryer or shut off the house circuit breaker for the appliance before you begin your repair. To access these parts, you will need to remove the dryer drum. For this installation you will need a 1/4-inch nut driver, a long flat-blade screwdriver, a short flat-blade screw diver, and a Phillips screwdriver.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Water Inlet Hose Washer – Part Number: WP16123
$10.47
Special Order
Water Inlet Hose Washer
Part #WP16123
Sold Individually. Order quantity needed.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Dryer Screw – Part Number: WP488627
$17.38
In Stock
Dryer Screw
Part #WP488627
Sold individually.
Touch-Up Paint – Part Number: W10446202
$29.99
In Stock
Touch-Up Paint
Part #W10446202
RACK-DRY – Part Number: W10864105
$99.78
Special Order
SCREW – Part Number: W10850046
$9.85
In Stock
SCREW
Part #W10850046
Connector – Part Number: WPW10336486
$57.15
In Stock
Connector
Part #WPW10336486
HOLDDOWN – Part Number: 346764A
No Longer Available
HOLDDOWN
Part #346764A
Dryer Power Cord, 4-ft – Part Number: PT220L
$36.25
In Stock
Dryer Power Cord, 4-ft
Part #PT220L
CORD-POWER – Part Number: PT400L
$36.25
In Stock
CORD-POWER
Part #PT400L

Questions And Answers for 11071632610

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry - For model number 11071632610
January 12, 2025
Dryer does not heat all the time. Has good airflow out, but does light all the time
Chris Boyle Profile
Hello Jerry, thank you for contacting us. Based on the description that you have provided, we would recommend checking the high limit thermostat, part number PS11741455, to solve the problem. It monitors and regulates the temperature inside the dryer. A malfunctioning thermostat can most probably cause this issue. We hope this helps!
$87.34
In Stock
Dryer High Limit Thermostat 255f
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11071632610

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
very loud squeeling sound
110 of 120 people found this instruction helpful.
  • jason from HOLDEN, MA
  • Really Easy
  • 30 - 60 mins
  • Socket set
The issue was the idler pulley. First I began opening up the front panel based on a youtube video but soon realized the model was slightly different and required a lot more items to remove. I saw the pulley in the back with nothing in the way so I put the front panel crap back on and removed the rear panel. There it was, very simple to re move and replace. I'm not looking forward to drum rollers though. Hopefully they're aren't as difficult as they appear.
Was this helpful?
Thank you for voting!
Squeaky Dryer Noise
94 of 106 people found this instruction helpful.
  • Eddie from PELZER, SC
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Screw drivers
I purchased the dryer repair kit with the drum belt, wheels and idler pulley. I watched the instructional videos online and it seemed fairly straight forward. Breaking down the dryer and replacing the pulleys was easy enough. My problem began when I tried to feed the drum belt around the idler pulley. After finishing the job, the dryer wo uld not turn and the sensor light stayed on. I thought something else was broken with the dryer and spent hours trouble shooting other problems that I was having. Finally I figured out that the drum belt was not installed correctly around the idler pulley. However, I could not get it properly installed from the front of the machine so I tried from the rear still with no avail. I finally had to fish the old belt out of the garbage can that I had thrown away earlier. I lined up the old belt with the new one in the kit and discovered that the new belt was much smaller, so I put the old one back on the drum. Here's the lesson I learned...make sure the belts are the same size before attempting to install. The old idler was responsible for the squeaking and that stopped but I am still using the same old drum belt. Hope it lasts.
Was this helpful?
Thank you for voting!
Motor out
95 of 191 people found this instruction helpful.
  • Jeff from Hutchinson, KS
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
I found that the dryer would not start turning by itself. Could manually help it start and it would run fine. Anyway, after a new set of rollers, belt, etc. found that the motor still would not start by itself. Ordered new motor and it was taken care of. You have to take the back off, remove the belt and remove the tumbler. After tha t, it is fairly easy. Two screws hold the motor down and then you can take the whole motor assembly out. Be careful removing the fan as it takes a 3/8 socket drive and it is plastic. Two clips hold the motor to the assembly. Needle nose pliers takes care of it. Replace and all should be good.
Was this helpful?
Thank you for voting!