11071402312 Kenmore Dryer - Overview
Sections of the 11071402312
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.
$51.40
In Stock
Dryer Screw
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$10.51
In Stock
Gas Valve Kit
PartSelect #: PS334359
Manufacturer #: 279923
This gas valve kit comes with the wiring harness.
$290.24
In Stock
Dryer Burner Tube
PartSelect #: PS11743780
Manufacturer #: WP693140
Includes hood.
$126.12
Special Order
Dryer Natural Gas Orifice
PartSelect #: PS11740485
Manufacturer #: WP234826
Are you struggling with your Whirlpool dryer's performance lately? It could be that your Burner Orifice needs replacing. Think of the Burner Orifice as the traffic police for the gas in your dryer'it ...
$33.55
Special Order
Valve Coil
PartSelect #: PS11752967
Manufacturer #: WPW10328463
If your dryer isn't performing as well as it used to, we have a solution for you. The COIL-VALVE could be exactly what you need. Made by Whirlpool, a brand known for trust and reliability, this genuin...
$79.91
In Stock
Burner Gas
PartSelect #: PS11723181
Manufacturer #: W10823508
With this dryer burner assembly comes with the igniter, burner, safety valve with coils, manifold and the hardware.
$353.57
In Stock
Common Symptoms of the 11071402312
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yrs old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Parts Used:
-
Karen from Pine Mtn. Club,, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
66 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse
Parts Used:
-
rex from streator, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
31 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cocverting natural gas to propane gas
removed burner installed propane orfice and kit as per instruction sheet.
Parts Used:
-
Billy from Maryville, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
43 of 76 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!