110688638 Kenmore Dryer - Overview
Sections of the 110688638
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.
$51.40
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$10.09
In Stock
Dryer Screw
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$10.51
In Stock
Natural Gas Burner Orifice
PartSelect #: PS11738696
Manufacturer #: WP15418
We're excited to help you with your appliance issues. We're talking about the Whirlpool Natural Gas Burner Orifice here. This little gem is more important than it looks'it's a real, authentic OEM repl...
$35.56
Special Order
Dryer Burner Tube
PartSelect #: PS11743780
Manufacturer #: WP693140
Includes hood.
$119.85
Special Order
Refrigerator Screw
PartSelect #: PS11742733
Manufacturer #: WP489128
This screw is sold individually.
$17.45
Special Order
Burner Gas
PartSelect #: PS334346
Manufacturer #: 279894
Is your stove not heating as efficiently as it used to? The Whirlpool Gas Burner might be just what you need to set things right. This part isn't just another accessory'it's a key ingredient in creati...
$293.00
Special Order
Dryer Gas Valve Limiter
PartSelect #: PS382436
Manufacturer #: 661580
This gas valve limiter is for dryers.
Gas valve limiter opens to release excess pressure from the gas valve if the gas supply pressure exceeds the normal rating.
Unplug the dryer and shut off t...
$344.63
Special Order
Questions And Answers for 110688638
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 110688638
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yrs old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Parts Used:
-
Karen from Pine Mtn. Club,, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
66 of 77 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse
Parts Used:
-
rex from streator, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
31 of 40 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer stoped heating
the problem was not the igniter its was the thermal fuse I broke the igniter during inspection of the problem be careful its a very easy thing to break repairs complete thank you parts select for the quick shipping and low prices
Parts Used:
-
valerie from Elasmore, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
23 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!