11060022011 Kenmore Dryer - Overview

Diagrams for 11060022011

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Maintenance Kit – Part Number: 4392065
$51.62
In Stock
Maintenance Kit
★★★★★
★★★★★
(106)
Part #4392065
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt attaches to the drum, idler pulley, and motor pulley. If your dryer is damaged, it may be making loud, squeaking, and/or squealing noises while the drum is turning. This is from normal wear and tear. The drum may eventually stop turning all together. This is a sign the part should be replaced. This is one complete maintenance kit. The kit includes the drum belt, drum support rollers, one idler pulley, four tri-rings, and one clip. The parts are constructed of plastic, metal, and rubber, and come in black/white/silver. Please note: Not all parts in this kit fit every model. Use your model number to confirm the correct parts for your unit.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Acrylic Paint - White - 1 Quart – Part Number: 799344
$346.60
Special Order
TEST KIT – Part Number: W11224254
$15.95
In Stock
TEST KIT
Part #W11224254
RACK-DRY – Part Number: WP689790
$51.65
Special Order
RACK-DRY
Part #WP689790

Questions And Answers for 11060022011

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dean - For model number 11060022011
February 4, 2023
will not get hot and switch will not turn off
Chris Boyle Profile
Hi Dean, thank you for your question. Looking at your model information, there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all your thermostats and thermal fuses. You can test those parts with a multimeter, and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multimeter, and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict airflow in your appliance. If the issues persist, we would recommend replacing the heating element, part number PS334313 and the switch, part number PS11742178. We hope this information helps!
$79.60
In Stock
Heating Element - 240V 5400W
$38.45
In Stock
Push-To-Start Switch
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Robert - For model number 11060022011
May 8, 2024
need a new lint screen
Chris Boyle Profile
Hi Robert, thank you for reaching out. The lint filter for your model is part number PS11738127. We hope that helps!
$75.68
In Stock
Lint Filter
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11060022011

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken drive belt
288 of 317 people found this instruction helpful.
  • DENNIS from ALTOONA, FL
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Grow a second set of hands. Always unplug any appliance. Remove lint screen. remove two screws (philips Head). I took a wooden shim lightly tapped w/hammer to pop front of dryer top free. Mine worked on hinges and just flipped back til it rested against the wall. Removed two 5/16 screws inside holding face on carefully raise face section off the support clips at either side on the bottom. Pull drum out (I have the large style drum commercial size [approx.). Clean the inside free of all lint (known to be fire hazard). Sling new belt around drum. Get newly grown set of hands to hold drum in place. Pinch belt to fit between tensioner, lift tensioner and place belt around motor pulley. Spin drum couple times to make certain belt isn't twisted. Reverse dismantle proccess to put back together. Replace all parts that come with kit, you'll feel better knowing you got a new dryer, almost.
Was this helpful?
Thank you for voting!
Dryer making extra noise while running
91 of 102 people found this instruction helpful.
  • Michael from Haines City, FL
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers, Wrench (Adjustable)
1st Unpluged power.
2nd removed two screws under lint screen cover.
3rd poped up lid with flathead screwdryer, then removed (2) 5/16 screws from door cover and unpluged lid switch, lifted up dryer door pannel
4th removed drum
5th took out plastic triangle wheel rings
6th removed old belt guild (to motor pully) ... Read more />7th removed old wheels and plastic rings stops
8th cleaned excessive hair dust with shopvac
9th put new replaicment part in dryer. made sure to turn manually to make sure belt was lined up properly, then put all dryer peices back.
10th aditional work, took back cover off and removed the (4) 1/4 screws for lint screen case (left side in dryer) vacumed out any excessive dirt lint ect, also cleaned any excessive dust I found in back of dryer, dryer , exhaust ect, and put all back together.
JUst like a new dryer aain after all PM was complete.
Was this helpful?
Thank you for voting!
dryer makes a lot of noice, bad rolleres
37 of 40 people found this instruction helpful.
  • Jesus E from Palm Bay, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers
super fast shipping, got the part in two days, and had it done in 15-20 min, remove the front pannel, remove the belt and tenssioner,took the drum out , took the old rollers , lubed the shafts,replaced the old rollers with the new ones, intalled the drum back, the tenssioner and the new belt, reinstalled the front pannel, and done...easy and fast job, like new dryer, works nice...save some money...the new one will do the same..just dry the clothes.
Was this helpful?
Thank you for voting!