1105806900 Kenmore Iron - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Light Bulb 10w – Part Number: WP22002263
$28.08
In Stock
Refrigerator Light Bulb 10w
★★★★★
★★★★★
(10)
Part #WP22002263
Brighten up your appliance with this easy-to-install 10-watt light bulb, perfect for dryers and refrigerators. It gives off a clear, steady light so you can easily see inside when the door is open. Whether you're replacing a bulb in your Whirlpool or another compatible brand, this one fits right in. Just twist it into place—no tools needed. For safety, make sure your appliance is turned off before swapping the bulb.
Water Inlet Valve - 120V – Part Number: 3374621
No Longer Available
Water Inlet Valve - 120V
Part #3374621
This water inlet valve is intended for use with horizontal motor dishwashers. It uses a 3/8 of an inch valve tubing and a mounting bracket.
Surface Element - 6 Inch 1200W – Part Number: WP3191455
$110.53
Special Order
Surface Element - 6 Inch 1200W
Part #WP3191455
Sold individually.
Washer Hose Inlet 6 Ft. Hose w/El – Part Number: WP76314
$46.15
Special Order
Washer Hose Inlet 6 Ft. Hose w/El
Part #WP76314
Requires two washers.
Nut – Part Number: WP90406
$15.95
Special Order
Nut
Part #WP90406
TERMINAL, RING, 3/16 INCH DIA. HOLE – Part Number: 247283
No Longer Available
BULB, LIGHT – Part Number: 509603
No Longer Available
BULB, LIGHT
Part #509603
SUB 50334 – Part Number: 50335
No Longer Available
SUB 50334
Part #50335
KNOB – Part Number: 50352
No Longer Available
KNOB
Part #50352
TERMINAL BLOCK – Part Number: 50318
No Longer Available
TERMINAL BLOCK
Part #50318
DIGITAL CLOCK – Part Number: 52458
No Longer Available
DIGITAL CLOCK
Part #52458
SWITCH – Part Number: 50331
No Longer Available
SWITCH
Part #50331

Common Symptoms of the 1105806900

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher running with no or little water.
21 of 25 people found this instruction helpful.
  • David from Atlanta, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench set
Removed screws under counter holding washer in place. Pulled washer out until I could access the back. Turned water supply off (in my case faucet under the sink) Turned power off at breaker.
Disconnected water line and electrical wires noting wire location. Removed solenoid unit by undoing two screws on frame. Installed new unit, co nnected wires and water. Turned water on to ensure no leaks and pushed washer back under counter. Turned power back on and checked machine operation. Replaced the screws under the counter to keep machine in place. This is very easy. In my area a plumber would charge $75 to do this.
Was this helpful?
Thank you for voting!
my wife said no water coming to dishwasher!
8 of 9 people found this instruction helpful.
  • Richard from North Las Vegas, NV
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Wrench set
i took off the kick plate and found the water valve. its the piece that water comes to from under the sink to connect to the dishwaser. it has a plug with 2 wires. i turned off the water supply, disconnected the wires(probably should have flipped the breaker but didnt) took out the 5/16 mounting screws, had to use a little end wrench on 1 because it was behind the water line and a nut driver on the other. i put some thread gook on the connection and put the new one in the way it was and it works great. i am writing this because thats where i got the info to diagnose in the first place and saved me $$$!
Was this helpful?
Thank you for voting!
burned out burner
9 of 15 people found this instruction helpful.
  • Natalia from Downers Grove, IL
  • Really Easy
  • Less than 15 mins
Simply plugged in hew burner. No probkems.
Was this helpful?
Thank you for voting!