11055 Kenmore - Overview

Models starting with 11055

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Pad – Part Number: WP8537982
$15.39
In Stock
Pad
★★★★★
★★★★★
(1)
Part #WP8537982
Sold Individually. Appliance normally takes 4.
Thrust – Part Number: WPW10121334
$9.85
In Stock
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Leveling Foot & Nut – Part Number: WP8563585
$27.81
In Stock
Washer Screw – Part Number: WPW10346892
$9.85
In Stock
Washer Screw
Part #WPW10346892
12-14 X 5/8. Sold individually. Your appliance will most likely require 4.
Dryer Clampmotor – Part Number: WP660658
$15.35
In Stock
Dryer Clampmotor
Part #WP660658
This clamp is used to secure the drive motor.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Touch-Up Paint - Biscuit – Part Number: 4392899
No Longer Available
Touch-Up Paint - Biscuit
Part #4392899
Washer Screw 818 X 1/2 – Part Number: WP9740848
$10.95
In Stock
Washer Screw 818 X 1/2
Part #WP9740848
Spacer Pad – Part Number: WP8537863
$52.98
Special Order
Spacer Pad
Part #WP8537863
Sold individuality.
Slide – Part Number: WP8578394
$71.45
Special Order
Slide
Part #WP8578394

Exact Part matches for your search term

Charger – Part Number: 11055
No Longer Available
Charger
This part number matches the current model number 11055
Part #11055
This is a genuine OEM sourced replacement part used on Black and Decker Hand Vacs. It allows you to charge your batteries. Please note that a weak or a defective battery can damage the charger. Weak batteries with bad cells will not hold a charge. It will send a message to the charger to keep charging eventually causing the charger to overheat and potentially smoke. Keep in mind this high-quality component is sold individually.
Cord bushing – Part Number: 11055
No Longer Available
Cord bushing
This part number matches the current model number 11055
Part #11055
CHARGER 12.0V (11332/11337 – Part Number: 11055
No Longer Available
CHARGER 12.0V (11332/11337
This part number matches the current model number 11055
Part #11055

Common Symptoms of models starting with 11055

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
missing parts on used washer and dryer pedstals
18 of 24 people found this instruction helpful.
  • Linda from Arcadia, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
screwed on

hard to find parts - order on Thurs evening and got Sat - made problem really easy
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 228 people found this instruction helpful.
  • Michelle from Richardson, TX
  • Really Easy
  • Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
Bent slide on pedestal
5 of 8 people found this instruction helpful.
  • Donald from Greenfield, WI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Note that the problem was with the pedestal, not the washing machine. In the process of attaching the two units together, the drawer in the pedestal is removed. When I tipped the assembly up, the slide slid out and locked horns with an object, bending the slide. The slide is an easy replacement. Just one screw holds it in place. A sl ot in the slide mates with a tab to hold the back side of the slide in place.
Was this helpful?
Thank you for voting!