Models > 11042722201

11042722201 Kenmore Washer - Overview

Sections of the 11042722201

[Viewing 8 of 8]

Manuals & Care Guides for 11042722201

Click to download
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(12)
PartSelect #: PS385132
Manufacturer #: 72017
18ml
$10.18
  On Order
Faucet Adapter – Part Number: WPW10254672
Faucet Adapter
★★★★★
★★★★★
(15)
PartSelect #: PS11751238
Manufacturer #: WPW10254672
Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.
$57.49
  In Stock
Snubber Strap – Part Number: WP3967051
Snubber Strap
PartSelect #: PS11742149
Manufacturer #: WP3967051
Sold individually.
$6.74
  In Stock
Hose Clamp – Part Number: WP596669
Hose Clamp
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$9.36
  In Stock
Hose Clamp – Part Number: WP285655
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$10.60
  In Stock
Idler Shaft Retaining Ring – Part Number: WP354987
Idler Shaft Retaining Ring
PartSelect #: PS11741848
Manufacturer #: WP354987
This idler shaft retaining ring is well under an inch long and is made of metal.
$16.78
  In Stock
Lid Strike – Part Number: WP358684
Lid Strike
★★★★★
★★★★★
(1)
PartSelect #: PS11741871
Manufacturer #: WP358684
This part is used to activate the lid switch when the lid opens/closes.
$12.97
  In Stock
Lid Hinge Mounting Screw – Part Number: WPW10119828
Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$9.36
  In Stock
Hose Clamp – Part Number: WP616099
Hose Clamp
PartSelect #: PS11743289
Manufacturer #: WP616099
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$11.62
  In Stock
Hose Clamp – Part Number: WP356138
Hose Clamp
PartSelect #: PS11741854
Manufacturer #: WP356138
This clamp helps to prevent leaking by holding the end of water hose in place.
$12.97
  In Stock
Water Inlet Hose Washer – Part Number: WP16123
Water Inlet Hose Washer
PartSelect #: PS11738697
Manufacturer #: WP16123
Sold Individually. Order quantity needed.
$9.36
  On Order
HOSE – Part Number: W10849778
HOSE
★★★★★
★★★★★
(1)
PartSelect #: PS11731128
Manufacturer #: W10849778
$264.62
  In Stock

Questions And Answers for 11042722201

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Lori
    February 20, 2020
    My washer won't stop filling. I was told this could be resolved with a new water pressure level switch, which i bought and am now trying to install. I know nothing about mechanics or repair, but i can't afford a repair person or a new washer. Is this the correct part and if so, where is the part located so i can swap it for the new one? Thank you so much!
    For model number 11042722201
    Hello Lori, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11742148 for the Water Level Switch. If the washer in overfilling when in the fill cycle, this is more then likely the issue. The Switch is located in the control panel behind the knobs. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Lori
    February 21, 2020
    My Kenmore washer is overfilling won't stop filling unless unplugged or the pause button is pressed. I replaced the water level pressure switch properly i believe, and the problem continues. I see no blockage visually in the small tube connected to the switch. Is there any other possibility? Or do i likely just need a new washer? Thank you so much for your help!
    For model number 11042722201
    Hello Lori. Thank you for your question about model 11042722201. If your washer is not draining, we would recommend the drain pump under part number PS896494. We hope this helps you.

    Was this helpful?
    Thank you for voting!
    Related Parts:

      Common Symptoms of the 11042722201

      [Viewing 12 of 12]
      Leaking
      Fixed by
      these parts
      Show All
      Noisy
      Fixed by
      these parts
      Show All
      Will not tumble
      Fixed by
      these parts
      Show All
      Will not drain
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Will not stop filling with water
      Fixed by
      these parts
      Show All
      Timer will not advance
      Fixed by
      these parts
      Show All
      Will not fill with water
      Fixed by
      these parts
      Show All
      Shakes and moves
      Fixed by
      these parts
      Show All
      Will not agitate
      Fixed by
      these parts
      Show All
      Pumps but will not spin
      Fixed by
      these parts
      Show All
      Lid or door will not open
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Scratches in Surface
      This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
      Parts Used:
      Touch-Up Paint - White
      • Michelle from Richardson, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      43 of 66 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.
      I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!
      Parts Used:
      Faucet Adapter
      • Ronald from Chebanse, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      28 of 32 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer hose was leaking
      We had the washer for more than 10 years, and the hose start leaking. We were happy with our whirpool washer and wanted just to replace the hose. Thanks to partselect.com we found the part we needed and hope to use our washer for many more years.
      Parts Used:
      HOSE
      • Bella from Rego Park, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers
      16 of 27 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!