11026112310 Kenmore Washer - Overview

Diagrams for 11026112310

See every part. Know exactly what you need.

Parts for the 11026112310

Touch-Up Paint - White – Part Number: 72017

Part #72017

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

$86.45

Lid Latch Assembly

★★★★★

(32)

Part #W10404050

The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.

$37.25

Washer Drain Hose

★★★★★

(4)

Part #W11244231

The drain hose carries used water from the washer to your house drain.

$48.35

Lid Latch Strike

★★★★★

(3)

Part #WPW10240513

This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly and you may not be able to run your washer. The latch is found under the lid and can be screwed out and...Read more

Read less

$9.85

Lid Hinge Mounting Screw

Part #WPW10119828

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

$10.95

Lid Bumper

Part #WP9724509

This gray and white washer lid bumper contains a rubber bottom and is sold individually.

$15.07

Washer Hose Clamp

Part #WP356138

This clamp helps to prevent leaking by holding the end of water hose in place.

$10.47

Hose Washer Kit

Part #285452A

Washer fill hose gasket and screen. This is a set of 4.

$53.43

Drain Hose, Extension

Part #DRNEXT4

Washing Machine Drain Hose Extension Kit *4 foot - includes hose, 2 clamps and hose connector.

Spray Paint - 12 oz. - White

Part #350930

$16.95

Leveling Feed

★★★★★

(2)

Part #W11213957

$10.95

Refrigerator Single Hex Head Screw

Part #WP489069

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Questions And Answers for 11026112310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Terence - For model number 11026112310

December 18, 2019

Unit is shaking out of balance on spin cycle

Hello Terence,thank you for your question. We would recommend checking the suspension rods, PartSelect Number PS11703287. I hope this helps!

1 person found this instruction helpful.

Was this helpful?

Kimberly - For model number 11026112310

February 7, 2024

Basket speed sensor or shift actuator is the part that apparently fixes the code F7E1 on my Kenmore washer… but I don’t see it. I want to be sure I have the right part…. Any ideas?? Thanks

Hello Kimberly, thank you for reaching out. The shift actuator you are looking for is part number PS11747977. We hope that helps!

$80.52

Washer Shift Actuator 120v 60hz

1 person found this instruction helpful.

Was this helpful?

Kimberly - For model number 11026112310

February 9, 2024

No question this time… just want to let you know how thankful I am for your help, your site and wonderful customer service!! I’m sure I’ll be in touch with you again soon. All my appliances were bought around 2012 so I’m expecting more issues at some point….but I know I know you’re there so I’m not gonna worry?? Thanks again!

Hello Kimberly, thank you for the feedback. Glad to know that you are happy with our services. You are welcome to contact us anytime if you require further assistance in future!

Was this helpful?

Wilson - For model number 11026112310

August 15, 2025

The washer makes a loud whirring noise when it’s spinning out

Hi Wilson, thank you for reaching out. Over time, the bearings in the washer can wear out or become loose, causing a loud whirring or grinding noise during the spin cycle. It comes attached to the gear case, part number PS16220910. You may need to replace it to fix the issue. We hope this solves your problem!

$387.57

Washer Gear Case

Was this helpful?

Common Symptoms of the 11026112310

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Lid or door won’t close

Videos related to models starting with 11026112310

Watch our pros, then fix it yourself.

Replacing the Washer Drain Hose

Replacing the Lid Latch Strike

Replacing the Leveling Feed

Replacing the Lid Bumper

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Defective lid latch - Cabrio Washer

98 of 125 people found this instruction helpful.

William from Wakefield, RI
Very Easy
15 - 30 mins
Nutdriver, Screw drivers

The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this inform ... Read more

Read less

Was this helpful?

Lid would not register closed washer would not spin

30 of 38 people found this instruction helpful.

william from HOLLEY, NY
Really Easy
30 - 60 mins
Pliers, Screw drivers

Remove top of washer 5min R&R cable 20 min total time 25 min.

Was this helpful?

Lid safety switch defective . Lid would not lock allowing washer operation.

19 of 21 people found this instruction helpful.

Garry from CANON CITY, CO
Easy
30 - 60 mins
Screw drivers, Socket set

Remove small screws on back of top on both sides, slide top forward. No need to remove water hoses. Lift top up to expose switch safety mechanism (black plastic) on front underside of top. Undo screws holding switch mechanism. remove plate cover from back of top and unplug wiring harness. Thread new wireing harness and plug through hole ... Read more

Read less

Was this helpful?