This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
Ask our experts a question about this model and we'll get back to you as soon as possible!
28 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jon
November 11, 2019
Using normal cycle with second rinse "on" and fabric softener "on". When do you manually add fabric softener? Does the machine beep when it is time to add softener? Have heard the machine beep when it was ew but have not heard it beep in a long time.-thanks
For model number 11025132411
Good Day Jon. Thank you for your question in regards to your unit (Model Number 11025132411). We will follow up with you via email shortly with some information that may help you. Best Regards.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
December 26, 2023
Washer started loud squeaking noise at the end spin cycle. Son thought it might be the drive belt. When he took the belt off he said it looked streched Got a new belt put on and ran two smaller loads of clothes, On second load heard noise from under the machine. The new belt had started coming apart. Bad belt?? Then I noticed the drum looked like it was setting lower in the machine with water and clothes inside . Now we are thinking that it may need the suspension rod set . Definitely confusing. Can you help us decide what part or parts we need in order to fix the problem. Thanks
For model number 11025132411
Hello Patricia, thank you for getting in touch. Based on the description that you have provided, the issue is most probably with the suspension rods, part number PS12347546. It supports the washer tub and keeps it stable during unbalanced loads. Due to unbalancing, the belt can come apart. You may need to replace the suspension rods to fix the issue. We hope this information helps!
Why does this machine twist and knot clothes i read on the internet that new and improved impeller pt #w10077050 might fix it
For model number 11025132411
Hello Jay and thanks for writing.
Washers Tangled, Twisted, Knotted Clothes. Tangled, twisted or knotted clothes are usually a result of improper sorting of wash loads. ... Avoid putting too many or too few items in the washer. Make sure you set the proper water level for the size load you are doing. We hope this helps. Please contact us anytime.
3 people found this helpful.
Was this helpful?
Thank you for voting!
David
November 24, 2021
Does all but spin out ..when it gets to spin the agitator spins rapidly and drum cannot keep up like its slipping..have inspected all the drive parts underneath and all look good..is there something else between agitator and drum in form of clutch or is it all controlled from underneath? also i ordered new gears and drive belt assembly already should be here sat.
For model number 11025132411
Hello David, Thank you for your inquiry. We have researched the model number you have provided and the drive clutch kit is the same as the washer drive pulley on our site, part# PS10057144. We also recommend checking the transmission gearcase and drive motor. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stephen
May 5, 2023
Tub is banging. Out of balance. Walking across the floor during the spin cycle
For model number 11025132411
Hello Stephen, thank you for the question. You may need to replace the suspension rod kit, part number PS12347546. We hope this helps!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.