11021352112 Kenmore Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Agitator Directional Cogs – Part Number: 80040
$6.55
In Stock
Agitator Directional Cogs
★★★★★
★★★★★
(200)
Part #80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
Washing Machine Suspension Rod Kit – Part Number: W10780048
$87.93
In Stock
Washing Machine Suspension Rod Kit
★★★★★
★★★★★
(60)
Part #W10780048
This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.
Tub Centering Spring - 2 Pack – Part Number: W10400895
$18.44
In Stock
Tub Centering Spring - 2 Pack
★★★★★
★★★★★
(9)
Part #W10400895
Tub centering springs. Comes (2) per package. Helps keep tub balanced and centered with the main top.
Washer Inner Cap Seal – Part Number: WPW10072840
$15.41
In Stock
Washer Inner Cap Seal
★★★★★
★★★★★
(2)
Part #WPW10072840
Also known as an O-Ring. This black o-ring seal is three inches in diameter.
Washer Agitator Cap Barrier w/Seal – Part Number: WPW10074580
$22.63
In Stock
Washer Agitator Cap Barrier w/Seal
★★★★★
★★★★★
(6)
Part #WPW10074580
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
Suspension Rod Support – Part Number: W10440729
$13.60
In Stock
Suspension Rod Support
★★★★★
★★★★★
(10)
Part #W10440729
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension rod supports. There are 4 of each type. Be sure to consult the parts diagram for your washer for the complete list of parts included. The suspension rod supports help secure the suspension rods, so your washer operates smoothly. If your dryer shakes, moves, or is noisy during operation, you may need to replace the suspension rod supports. These are OEM parts sourced directly from the manufacturer.
Washer Washer – Part Number: WP3949550
$17.26
In Stock
Washer Washer
★★★★★
★★★★★
(1)
Part #WP3949550
This part goes on the agitator retaining bolt.
Washer Sealtub – Part Number: W10324647
$90.28
In Stock
Washplate Bolt – Part Number: W10772621
$11.61
In Stock
Washplate Bolt
Part #W10772621
Sold individually.
Agitator – Part Number: WP8578209
$173.64
In Stock
Agitator
★★★★★
★★★★★
(2)
Part #WP8578209
This washer agitator is a durable replacement component designed to restore proper wash action in top-load washing machines. Its dual-action design moves clothing through the water while helping distribute detergent evenly for effective cleaning. Made from a sturdy poly/TPE blend, it rotates back and forth during the wash cycle to help lift dirt and stains from fabrics. Installation involves removing the fabric softener dispenser and top cap, then using a socket wrench to secure the agitator in place. Basic mechanical knowledge is helpful.
Dryer Screw – Part Number: WPW10109200
$11.66
In Stock
Dryer Screw
Part #WPW10109200
11-16 x 3/4 Sold individually.
Washer Water Pressure Hose Cut to Fit – Part Number: WP353244
$63.75
In Stock
Washer Water Pressure Hose Cut to Fit
★★★★★
★★★★★
(2)
Part #WP353244
This is the hose that tells your appliance if your tub is at the desired water level.

Questions And Answers for 11021352112

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David - For model number 11021352112
February 14, 2025
i need a part number for the start pause switch
Chris Boyle Profile
Hi David, Thank you for reaching out. The Start Switch behind the button is part of the Control Board PartSelect Number PS4704635. The Pushbutton for the Start is PartSelect Number PS11751143. Thank you for the inquiry, good luck with the repair!
$524.83
Special Order
CNTRL-ELEC
$78.67
Special Order
Push Button
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11021352112

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
washer wouldn't agitate
956 of 1058 people found this instruction helpful.
  • mike from Kent, WA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the a gitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Was this helpful?
Thank you for voting!
top half of agitator did not move during wash cycle
288 of 337 people found this instruction helpful.
  • dennis from new stanton, PA
  • Really Easy
  • Less than 15 mins
  • Socket set
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of o ld cogs remove and replace with new, reassemble
Was this helpful?
Thank you for voting!
Violent shacking in spin mode.
189 of 230 people found this instruction helpful.
  • Terry from Homosassa, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Watched a video on the internet.
Was this helpful?
Thank you for voting!