This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandra - For model number 11020222510
February 17, 2020
Hi. Can you please send me the dimensions for this Kenmore washing machine model. Height, width, how many cubic feet? Thanks so much!
Hello and thank you for writing.
This unit has a 4 3 cu ft capacity.27 inches by 27 .5 inches by 42 inches (WDH).We hope this helps. Please contact us anytime if you require further assistance.
6 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Tim - For model number 11020222510
February 28, 2025
The latest ad in the washer does not stay balanced during the spin cycle. I believe the suspension arms are worn out. Do have this part?
Hello Tim, thank you for your question. The Suspension Springs and Rods ( kit of 4) is PS11703289. Good luck with your repair.
Replaced belt and clutch assembly,ran 2 loads then it stopped spinning and makes a stretching grinding noise.this was the problem prior to me replacing parts???
Hello Joe, thank you for reaching out. Based on our research, the issue could be caused by a faulty gearcase, part number PS16220913. It drives the agitator and spins the basket in the washer. If that does not help, we would recommend replacing the motor, part number PS11757089. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Hello Ruth, thank you for contacting us. According to our research, we would recommend checking the electronic control board, part number PS12347164, to fix the issue. We hope this helps!
How do I unlock the door on that washing machine unplugging it does not work
Hello Leroy, thank you for reaching out. We have researched and found that to unlock the lid, you may need to press the START/Pause/Unlock Lid button. If the lid still does not unlock, then you may need to check the control board, part number PS12347164, to solve the problem. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water would not fill the washer except for 4 inches.
38 of 52 peoplefound this instruction helpful.
Patricia from MURPHYSBORO, IL
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
Was this helpful?
Thank you for voting!
latch switch was not working
28 of 43 peoplefound this instruction helpful.
John from BEAVER DAMS, NY
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
unfasten top from back, slide top forward and lift up, remove switch and cable (one piece), in stall new switch and cable, put top down and slide back, reinstall screws.
Was this helpful?
Thank you for voting!
Whirlpool builds junk lid switches don't lasting when you have suffered water! About every 3 months it goes out! Repairman won't come to fix so I do it myself!
13 of 17 peoplefound this instruction helpful.
Charlie from OAKWOOD, OH
Really Easy
15 - 30 mins
Screw drivers
Unplug washer Take back panel off Un plug lid switch Take screwdriver snap out switch Snap in New switch Plug it in Replace back panel plug in washer Wash
My Orders
