11-16 Tappan - Overview

Models starting with 11-16

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Screw – Part Number: 5303288565
$9.95
In Stock
Screw
Part #5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
Thermostat Bulb Clip – Part Number: 5303284616
$21.95
Special Order
Thermostat Bulb Clip
Part #5303284616
Clock Knob – Part Number: 318036310
No Longer Available
Clock Knob
Part #318036310
Sold Individually.
WIRE TIE – Part Number: 5304464772
$23.95
In Stock
WIRE TIE
Part #5304464772
Broil Element - 3000W 240V – Part Number: 220T017P02
No Longer Available
Broil Element - 3000W 240V
Part #220T017P02
SEAL – Part Number: 5303295311
No Longer Available
SEAL
Part #5303295311
KNOB – Part Number: 5303912632
No Longer Available
KNOB
Part #5303912632
Door Hinge - Left Side – Part Number: 5303205939
No Longer Available
Door Hinge - Left Side
Part #5303205939
Door Hinge - Right Side – Part Number: 5303205940
No Longer Available
Door Hinge - Right Side
Part #5303205940
ELEMENT – Part Number: 5303207152
$207.25
Special Order
ELEMENT
Part #5303207152
Top Oven Door Seal – Part Number: 5303207644
No Longer Available
Top Oven Door Seal
Part #5303207644

Exact Part matches for your search term

Holder – Part Number: 11-16
No Longer Available
Holder
This part number matches the current model number 11-16
Part #11-16
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven light bulb went dark; it needed replacing
10 of 17 people found this instruction helpful.
  • Lise from CEDAR GROVE, NJ
  • Very Easy
  • Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 people found this instruction helpful.
  • ANGELA from MEBANE, NC
  • Very Easy
  • Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Broiler element burnt out. It literally broke off & emitted white-hot sparks.
5 of 6 people found this instruction helpful.
  • MG from ENCINITAS, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
NOTE: My Tappan oven (model 77 4972 23) is 33 years old & it was difficult to find the correct part number for the broiler element. Part No. 5303051140 (PS 453940) costs only $18.00 but won't work because the plate that screws onto the oven is only 1.5 inches wide and it needs to be 3.75 inches wide to fit. The part number that works ( and costs $89.00) is 220T017P02 (PS429510).

First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw while turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws from the 3.75 inch plate holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Voila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them. GREAT customer service!!
Was this helpful?
Thank you for voting!