107RH971E Hotpoint Range - Overview

Diagrams for 107RH971E

See every part. Know exactly what you need.

Parts for the 107RH971E

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Trim Ring - 6 Inch – Part Number: WB31X5013
$13.95
Special Order
Trim Ring - 6 Inch
Part #WB31X5013
This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
Trim Ring - 8 Inch – Part Number: WB31X5014
$15.95
Special Order
Trim Ring - 8 Inch
Part #WB31X5014
This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.
Range Infinite Heat Switch Kit – Part Number: WB21X36771
No Longer Available
Range Infinite Heat Switch Kit
Part #WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
Tilt-Lock Hinge-Mounted Surface Burner - 8" – Part Number: WB30X354
No Longer Available
Tilt-Lock Hinge-Mounted Surface Burner - 8"
Part #WB30X354
This kit includes an 8", three wire, 2450W surface element. This low rise element has an attached trim ring, and a terminal block with all three-wire units.
Tilt Lock Hinge Mounted Surface Unit - 6" – Part Number: WB30X356
$114.82
Special Order
Tilt Lock Hinge Mounted Surface Unit - 6"
Part #WB30X356
Upgrade your electric range with this 6-inch high-rise heating element, perfect for everyday cooking. Whether you're simmering sauces or boiling water, it heats up quickly and spreads heat evenly. The raised coil design helps your food cook more efficiently. Installing it is easy—just unplug your stove, pop out the old element, and slide the new one into place. Its clean, metallic look fits right in with most kitchen styles.
Read less
DISCONTINUED – Part Number: WB21X5212
No Longer Available
DISCONTINUED
Part #WB21X5212
DISCONTINUED – Part Number: WB19X5184
No Longer Available
DISCONTINUED
Part #WB19X5184
DISCONTINUED – Part Number: WB22X5013
No Longer Available
DISCONTINUED
Part #WB22X5013
DISCONTINUED – Part Number: WB2X5379
No Longer Available
DISCONTINUED
Part #WB2X5379
DISCONTINUED – Part Number: WB44X5029
No Longer Available
DISCONTINUED
Part #WB44X5029
DISCONTINUED – Part Number: WB3X5410
No Longer Available
DISCONTINUED
Part #WB3X5410

Common Symptoms of the 107RH971E

How this model fails, and the parts that fix it.

Element will not heat
Fixed by
these parts
Fixing
Fixing
Fixing
Show All

Videos related to models starting with 107RH971E

Watch our pros, then fix it yourself.

Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 6 Inch

Replacing the Trim Ring - 8 Inch

Replacing the Trim Ring - 8 Inch

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
50+ Yr Old Cooktop Burner had one of its two coils burn out
26 of 29 people found this instruction helpful.
  • Barbara from Smyrna, GA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
The hardest thing was finding the part to order! The GE Cooktop is from 1957 when the house was built. I followed the instructions that came with it. After seeing where the screw on hinge was supposed to be, I cleaned away the caked grease and finally saw the screw. I had to use a nut driver to remove it since it didn't have a slot for a screwdriver. Once that screw was out, the rest was easy. Before disconnecting any wires, I laid the new and old parts beside each other and drew a diagram showing where each wire (red, black & white) connected. It was a bit scary stripping the wires since they were old and fragile. It said to bend them into a "U" and solder but I didn't have soldering skill or equipment so I just tightened the screws holding the wires carefully. The connections are all nicely isolated in the bakelite insulator so it didn't seem cruicial. After working the new unit into place and turning on the power (at the circuit breaker), the burner worked perfectly. The replacement part looked exactly like the original. I was so amazed to be able to obtain the replacement burner after all these years! Thank-you PartsSelect!
Read less
Was this helpful?
Thank you for voting!
Large burner would operate on high setting only.
22 of 28 people found this instruction helpful.
  • Ernest from Bellevue, NE
  • Really Easy
  • 15 - 30 mins
  • Pliers, Socket set
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
Was this helpful?
Thank you for voting!
Burner had shorted out
18 of 21 people found this instruction helpful.
  • John from Granite City, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
It was so easy. I turned off the power to the range, loosened the hinge screw and removed the burner unit from the stovetop. Next I removed the two spring clips holding the ceramic housing covering the three connectors. Then I loosened the three screws holding the 3 wire connectors to the burner, reconnected the 3 wires to the new bur ner unit, positioned the ceramic insulator housing and reinstalled the spring clips and finally replaced and tightened the hinge screw. It took about 5 or six minutes, max.
You can do this!
Read less
Was this helpful?
Thank you for voting!
View More