106KSSS36QDX05 KitchenAid Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Door Switch – Part Number: W11384469
$43.83
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(36)
Part #W11384469
Door switch turns the light off when you close the door.
Refrigerator Light Bulb 10w – Part Number: WP22002263
$28.08
In Stock
Refrigerator Light Bulb 10w
★★★★★
★★★★★
(10)
Part #WP22002263
Brighten up your appliance with this easy-to-install 10-watt light bulb, perfect for dryers and refrigerators. It gives off a clear, steady light so you can easily see inside when the door is open. Whether you're replacing a bulb in your Whirlpool or another compatible brand, this one fits right in. Just twist it into place—no tools needed. For safety, make sure your appliance is turned off before swapping the bulb.
Refrigerator Micro Switch – Part Number: WP2162361
$27.45
In Stock
Refrigerator Micro Switch
★★★★★
★★★★★
(6)
Part #WP2162361
This switch is located inside the dispenser.
Refrigerator Nozzle And Tube Kit – Part Number: WP4388152
$262.72
In Stock
Refrigerator Nozzle And Tube Kit
★★★★★
★★★★★
(6)
Part #WP4388152
This kit is intended for use with refrigerators that have a water dispenser in the door.
Refrigerator Ice Bin Auger Drum – Part Number: 4388736
$65.95
On Order
Refrigerator Ice Bin Auger Drum
★★★★★
★★★★★
(6)
Part #4388736
This white ice bin auger drum comes with a washer.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Refrigerator Screw – Part Number: WP489478
$10.41
In Stock
Refrigerator Screw
Part #WP489478
Sold individually.
Refrigerator Ice Dispenser Motor Coupling – Part Number: WPW10169511
$31.43
Special Order
Refrigerator Ice Dispenser Motor Coupling
★★★★★
★★★★★
(1)
Part #WPW10169511
This part attaches to the drive shaft of the ice dispenser motor.
Roller and Eyelet - Kit of 2 – Part Number: 4318078
No Longer Available
Refrigerator 40w Light Bulb – Part Number: WP548049
$58.87
Special Order
Refrigerator 40w Light Bulb
Part #WP548049
This light bulb is found behind the controls box in some refrigerators.
Refrigerator Screw – Part Number: WPW10272364
$17.55
In Stock
Refrigerator Screw
Part #WPW10272364
Sold individually.
Dryer Screw – Part Number: WP681414
$10.95
In Stock
Dryer Screw
Part #WP681414
This screw is sold individually.

Common Symptoms of the 106KSSS36QDX05

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic bits dispensed from Ice Dispenser in Door
205 of 254 people found this instruction helpful.
  • john from seaford, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
Removed Ice bin from Fridge

Removed all bolts on bin with nut driver...about six

Removed housing...be careful with spring on crusher/cube control rod

Removed C clamp on end of auger with small slotted screw driver and needle nose pliers.

Removed plastic nut on end of auger shaft

Remov ed Ice crusher jaws and laid them out in the correct order

Removed Ice propeller and installed new part

Put back together in opposite order

Easy
Was this helpful?
Thank you for voting!
Lights inside refrigerator not working
137 of 258 people found this instruction helpful.
  • Clint from Rayville, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
Ice Maker would not eject the Ice either by cube or crushed
69 of 96 people found this instruction helpful.
  • Jack from College Station, TX
  • A Bit Difficult
  • More than 2 hours
  • Screw drivers
removed the Ice Tray, removed the cover that the motor is attached to, The biggest problem I had was getting the coupler off the drive shaft. It would not tightyen up and would not turn auger. I had to remove the unit and take a hack saw to cut the coupler off
The other problem I could not get the wireing harness unpluged from the refigrator, and had to remove each individual wire from its contact. I had to remove the whole motor unit inorder to get the old coupler off.
Was this helpful?
Thank you for voting!