1069834920 Kenmore Ice Maker - Overview

Diagrams for 1069834920

See every part. Know exactly what you need.

Parts for the 1069834920

$10.40

Dryer Screw

Part #WP90767

This screw is sold individually.

$10.50

Screw

Part #WP488729

Metallic screw that is less than an inch long. Does not include the plastic washer.

$43.95

Water Tube Kit

★★★★★

(2)

Part #W10823511

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water ...Read more

Read less

$17.55

Refrigerator Compression Nut

Part #WP627018

This compression nut is used with the plastic water line of the icemaker assembly.

$10.95

Dryer Screw

Part #WP681414

This screw is sold individually.

Single Outlet Water Valve Kit

Part #759296

This single outlet water valve is intended for use with some commercial ice machines, and not refrigerator icemakers. It comes with a mounting bracket, two screws, and a washer.

$32.24

Ice Maker Scoop

Part #W11420408

$14.87

Plastic Tubing Inserts - 4 Included

Part #4387491

These inserts are used with 1/4 inch plastic tubing.

$610.88

Ice Maker Water Pump and Motor

Part #WP756782

This part helps circulate water through the evaporator to form ice that will be cut into cubes.

Plug

Part #758597

$13.13

Screw

Part #WP486579

Sold individually.

$54.95

Filter Drier Tube

★★★★★

(1)

Part #W10843121

This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.

Common Symptoms of the 1069834920

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Ice maker not making ice

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The water pump broke (too old).

24 of 30 people found this instruction helpful.

NICOLAS from MCALLEN, TX
Easy
30 - 60 mins
Nutdriver, Socket set

I removed the three nuts that hold the old pump, easy. Next step was to replace with the new pump, tricky, because it goes real deep in the machine and my arms barely reach it.
After several attemtps, I finally reached one screw and bolt it immediately. Rest was piece of cake.
What I liked most, is that you don't need to do any ... Read more

Read less

Was this helpful?

Quit making ice

20 of 22 people found this instruction helpful.

Chris from Flower Mound, TX
Easy
Less than 15 mins
Screw drivers

This is a stand alone ice maker that uses a standard water valve. When the valve fails (usually stuck open) the water never chills enough to freeze because water is constantly flowing into the hopper. The valve is in the very front. Remove the front panel. Turn of the water supply and disconnect the valve. Replace the valve and turn on th ... Read more

Read less

Was this helpful?

Noisy

21 of 31 people found this instruction helpful.

Paul from Port Lavaca, TX
Easy
30 - 60 mins
Socket set

Easy to do.!

Was this helpful?