1069722991 Kenmore Air Conditioner - Overview

Diagrams for 1069722991

See every part. Know exactly what you need.

Parts for the 1069722991

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
WASHER – Part Number: W11236646
$30.65
In Stock
WASHER
Part #W11236646
This part is located on the drum roller support shaft.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Silicone Rubber Adhesive - 2 oz – Part Number: WP279368
No Longer Available
Silicone Rubber Adhesive - 2 oz
Part #WP279368
This is a high temperature adhesive that is used for gaskets and felt seals.
Refrigerator Single Hex Head Screw – Part Number: WP489069
$10.95
In Stock
Refrigerator Single Hex Head Screw
Part #WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
Dryer Motor Clip – Part Number: WPY015825
$31.95
Special Order
Dryer Motor Clip
Part #WPY015825
Sold individually.
Winter Air Conditioner Cover – Part Number: 484069
No Longer Available
Access Valve - 5/16 Inch – Part Number: 978026
$69.14
In Stock
Thermostat with Clip and Guide – Part Number: WP1160325
$172.74
Special Order
SEALER – Part Number: 4318168
$53.85
In Stock
SEALER
Part #4318168
Rotary Switch – Part Number: 1158669
No Longer Available
Rotary Switch
Part #1158669
SHAFT-CNTL – Part Number: 1161504
No Longer Available
SHAFT-CNTL
Part #1161504
Putty – Part Number: 212643
$60.45
In Stock
Putty
Part #212643
Permagum sealer for refrigerant line insulation.
View More

Common Symptoms of the 1069722991

How this model fails, and the parts that fix it.

Noisy
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ac Would Cool But Compresser Would Not Cycle On &Off
11 of 18 people found this instruction helpful.
  • Ron from Knob Noster, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons
Was this helpful?
Thank you for voting!
A/C coils would freeze up and unit would not shut off with temperature control.
1 of 2 people found this instruction helpful.
  • Travis from Locust Grove, GA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Unplugged unit.
Pulled front cover and removed switch knobs.
Pulled switch plate off and replaced thermostat switch and temperature sensor bulb assembly.
Reassembled and plugged in.
Unit works normal.
Was this helpful?
Thank you for voting!
Both motor clips broken - >40 year old dryer!!
1 of 4 people found this instruction helpful.
  • susan from Socorro, NM
  • A Bit Difficult
  • 30 - 60 mins
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Read less
Was this helpful?
Thank you for voting!
View More