1069701071 Kenmore Air Conditioner - Overview

Diagrams for 1069701071

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Range Hex Nut – Part Number: WP488130
$12.05
Special Order
Range Hex Nut
Part #WP488130
Part may differ in appearance, but functions same as original.
Silicone Rubber Adhesive - 2 oz – Part Number: WP279368
No Longer Available
Silicone Rubber Adhesive - 2 oz
Part #WP279368
This is a high temperature adhesive that is used for gaskets and felt seals.
Refrigerator Single Hex Head Screw – Part Number: WP489069
$10.95
In Stock
Refrigerator Single Hex Head Screw
Part #WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
SCREW – Part Number: W10856125
$8.95
Special Order
SCREW
Part #W10856125
Sold individually.
Dryer Motor Clip – Part Number: WPY015825
$31.95
Special Order
Dryer Motor Clip
Part #WPY015825
Sold individually.
Winter Air Conditioner Cover – Part Number: 484069
No Longer Available
Refrigerator Sealstrip – Part Number: WP854334
$19.95
Special Order
Refrigerator Sealstrip
Part #WP854334
Access Valve - 5/16 Inch – Part Number: 978026
$69.14
In Stock
Access Valve - 5/16 Inch
Part #978026
This 5/16 inch service valve provides an access point to the refrigerator or freezer sealed refrigerant circuit. It is used during cooling system service when access to the refrigerant lines is required. The connection size must match the tubing specified for the repair. Confirm the valve and installation location using the appliance parts list and service instructions before ordering. This fitting serves the refrigerant system. A cooling problem alone does not establish that the valve needs replacement, since other components can cause similar symptoms. This is an OEM part sourced directly from the manufacturer.
SEALER – Part Number: 4318168
$53.85
In Stock
SEALER
Part #4318168
This black sealing putty comes in a 1 pound bar and fills cabinet openings around wire harnesses and refrigerant lines. It helps limit air leaks where these parts pass through the refrigerator cabinet. The putty is also used for refrigerant line insulation in specified appliance repairs. Missing or damaged material may leave gaps that need attention during service. Inspect the existing seal around the repair area and follow the appliance instructions for placement and application. Confirm the intended use before applying it to a cabinet opening or tubing connection. This is an OEM part sourced directly from the manufacturer.
Temperature Control Thermostat Kit – Part Number: 1161021
No Longer Available
Control Knob - White – Part Number: 1168687
No Longer Available
Control Knob - White
Part #1168687
Putty – Part Number: 212643
$60.45
In Stock
Putty
Part #212643
This pliable sealing putty fills cabinet openings around wire harnesses and refrigerant lines in the refrigerator. It is also used to insulate refrigerant lines where specified in the appliance service instructions. Sealing these openings helps limit warm air entering and cold air escaping through gaps in the cabinet. Missing or damaged putty may leave openings that need attention during a repair. Check the existing sealing material and follow the appliance instructions for placement and application. This putty seals cabinet gaps and is not intended to repair a leaking refrigerant tube. This is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Both motor clips broken - >40 year old dryer!!
1 of 4 people found this instruction helpful.
  • susan from Socorro, NM
  • A Bit Difficult
  • 30 - 60 mins
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
Was this helpful?
Thank you for voting!