Models > 106955310

106955310 Kenmore Dehumidifier - Overview

Sections of the 106955310

[Viewing 3 of 3]
AIR FLOW AND CONTROL Diagram and Parts List for Kenmore Dehumidifier
AIR FLOW AND CONTROL
CABINET Diagram and Parts List for Kenmore Dehumidifier
CABINET
UNIT Diagram and Parts List for Kenmore Dehumidifier
UNIT
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP488729
Screw
PartSelect #: PS11742721
Manufacturer #: WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$10.09
  In Stock
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$11.64
  In Stock
Single Hex Head Screw – Part Number: WP489069
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$6.91
  In Stock
Condensation Drip Pan – Part Number: WP951901
Condensation Drip Pan
PartSelect #: PS11746885
Manufacturer #: WP951901
Used with dehumidifiers.
  No Longer Available
Switch – Part Number: 999747
Switch
PartSelect #: PS406545
Manufacturer #: 999747
Full bucket switch.
  No Longer Available
WASHER – Part Number: 486420
WASHER
PartSelect #: PS377216
Manufacturer #: 486420
  No Longer Available
Screw – Part Number: WP3177991
Screw
PartSelect #: PS11740820
Manufacturer #: WP3177991
Sold individually.
$9.89
  In Stock
Humidistat Kit – Part Number: WP1166055
Humidistat Kit
PartSelect #: PS11738345
Manufacturer #: WP1166055
$117.50
  Special Order
Zip Tie – Part Number: WPW10339879
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
$10.25
  In Stock
WASHER – Part Number: 1168324
WASHER
PartSelect #: PS319481
Manufacturer #: 1168324
  No Longer Available
Return Bend Kit - 5/16" Tube – Part Number: 4388784
Return Bend Kit - 5/16" Tube
PartSelect #: PS372224
Manufacturer #: 4388784
  No Longer Available
COMPRESSOR – Part Number: 4388687
COMPRESSOR
PartSelect #: PS372154
Manufacturer #: 4388687
  No Longer Available
Back to Top
View More

Questions And Answers for 106955310

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The humidifier would run continuously regardless of the humidity setting.
I removed the old humidistat and replaced it with the new one which was an exact fit.
Parts Used:
Humidistat Kit
  • Stephen from Richfield, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dehumidifer collection pan (bucket) overflowing with water
The unit should cutoff when the pan gets full enough for it to depress the pan full switch on the back of the unit. Used an ohm-meter to check and see that this switch was bad. Replaced with this part and now it cuts off again when the pan is full. Not hard at all. Take the cover off the unit (screws) then take the switch out (nut) and replace.
Parts Used:
Switch
  • Carl from Tuscaloosa, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More