1068364753 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Door Switch – Part Number: W11384469
$43.83
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(36)
Part #W11384469
Door switch turns the light off when you close the door.
Defrost Timer – Part Number: W10822278
$45.92
In Stock
Defrost Timer
★★★★★
★★★★★
(12)
Part #W10822278
This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number. NOTE: The black lead on the defrost timer, will go to terminal number 2.
Icemaker Control Assembly – Part Number: W10190935
$96.02
On Order
Icemaker Control Assembly
★★★★★
★★★★★
(20)
Part #W10190935
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
Screw – Part Number: WP681249
$10.95
In Stock
Screw
Part #WP681249
Sold individually.
Ice Maker Water Fill Tube Kit – Part Number: WP2196157
$24.11
In Stock
Ice Maker Water Fill Tube Kit
★★★★★
★★★★★
(5)
Part #WP2196157
This kit comes with a fill tube and a compression nut.
Refrigerator Water Fill Cup & Bearing – Part Number: WP628356
$46.15
On Order
Refrigerator Water Fill Cup & Bearing
★★★★★
★★★★★
(1)
Part #WP628356
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
Evaporator Fan Motor Kit – Part Number: 482731
$95.41
In Stock
Evaporator Fan Motor Kit
★★★★★
★★★★★
(5)
Part #482731
The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. NOTE: NO LONGER ABLE TO GET BRACKETS. SEE PART INSTRUCTIONS IN SERVICE MATTERS INSTRUCT SHEET# W11500157 11/20KC.
Cycling thermostat – Part Number: WP627985
$84.24
In Stock
Cycling thermostat
★★★★★
★★★★★
(1)
Part #WP627985
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
Single Outlet Water Valve Kit – Part Number: 4318047
$57.58
In Stock
Single Outlet Water Valve Kit
★★★★★
★★★★★
(1)
Part #4318047
The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.
Screw – Part Number: WP488729
$10.50
In Stock
Screw
Part #WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
Shelf Stud – Part Number: W11581579
No Longer Available
Shelf Stud
★★★★★
★★★★★
(2)
Part #W11581579
This is a 6 piece kit.
Refrigerator Hinge Washer – Part Number: WP488296
$13.85
In Stock
Refrigerator Hinge Washer
Part #WP488296
This part can be used on either side of the center door hinges for some refrigerators.

Common Symptoms of the 1068364753

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No ice
567 of 688 people found this instruction helpful.
  • Daniel from Suwanee, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Was this helpful?
Thank you for voting!
Ice Maker stopped working
135 of 154 people found this instruction helpful.
  • Robert from Port Washington, NY
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
With socket wrench un-screwed the 3 screws and pulled out the ice maker assembly.

Pulled off white plastic end-cap and noticed the plastic gear disk had snapped off (sub part # R0167202)

However, it is all-one-part of the motor assembly unit # w10190935 (part # PS2341896) which must be ordered as a complete part. ... Read more />
Unscrewed the motor assembly (3 screws) with phillips head screw driver.

Screwed in the new unit.

Placed ice maker back into location and tightend the bacing srews.

1 hour later ice was falling!
Was this helpful?
Thank you for voting!
Broken elbow on icemaker water fill tube.
130 of 142 people found this instruction helpful.
  • Charles from Orland Hills, IL
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done.
Was this helpful?
Thank you for voting!