This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
***NOTE: Ice maker does NOT come with the bail or shut off arm. You must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and th...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
NOTE: ...
This part may differ in color, but is functionally the same. It's no longer available in clear. Sold individually.
$74.88
In Stock
Questions And Answers for 10674254402
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
July 21, 2023
Where is the water reservoir for the water dispenser located and how do I access it? The tube on my fridge is broke about 3 inches from the valve. Water comes out of this tube when the button is depressed but when I splice the 2 ends together no water comes out of the dispenser. I think the fridge was once set to cold and the line froze.
For model number 10674254402
Hi Gary, thank you for your question! The water tube, part number PS886401, is located at the back of your refrigerator. For accessing the water tube There is a video on our website that you may reference that may help you with this. It is possible that the line froze due to the refrigerator being set to a very cold temperature. If you have spliced the tube together and no water comes out of the dispenser, there may still be a blockage in the line, or the splice might not be sealed properly. Make sure there are no kinks, bends, or obstructions in the water line. Ensure that the splice you made between the broken ends of the tube is secure and sealed properly. Any leaks or loose connections can prevent water flow. If you suspect that the water line is frozen, turn off the refrigerator and leave the freezer door open for a few hours to allow the line to thaw. You can also use a hairdryer on low heat to gently warm the line. After thawing and reassembling everything, test the water dispenser again to see if water comes out. Good luck with your repair!
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and mount new Ice Maker on the two top screws and install the bottem screw. It took e while for the new Ice Maker to start it's cycle but after it did, it worked GREAT. Part Select service was OUTSTANDING, ordered part one day and received the next. THANKS!!!!
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!