1066021101 Kenmore Freezer - Overview

Diagrams for 1066021101

See every part. Know exactly what you need.

Parts for the 1066021101

$10.95

Air Conditioner Cover Screw

Part #WP308685

Sold individually.

$16.72

Refrigerator Door Hinge Nylon Washer

Part #WP487576

This small hinge washer acts as a spacer between the refrigerator door and hinge. It helps keep the door aligned and reduces wear as the door moves. Replace a missing, cracked, or worn washer. Empty the door shelves and have another person support the door during installation. Use the exact model number to confirm fit.

$10.50

Screw

Part #WP488729

Metallic screw that is less than an inch long. Does not include the plastic washer.

$9.85

Refrigerator Hinge Washer

★★★★★

(1)

Part #WP487802

$59.35

Surface Element Switch

★★★★★

(2)

Part #W10900107

$10.65

Screw

Part #WP486754

Sold individually.

$27.28

8-18 X .625 TR CR AB

Part #W11693756

Sold individually.

$11.65

Screw

Part #WP965173

Sold individually.

$25.95

Screw - #10 - 32x1/2

Part #486146

Sold Individually.

SCREW, REPAIR

Part #488930

$16.96

Transformer Screw

Part #WP488787

This screw is sold individually.

SPACER

Part #204349

Common Symptoms of the 1066021101

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Door won’t open or close

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Burner would not heat

27 of 35 people found this instruction helpful.

Edward from Malvern, AR
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers

First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the ... Read more

Read less

Was this helpful?

burner quite heating discovered switch was the problem

9 of 12 people found this instruction helpful.

Ronald from McClelland, IA
Really Easy
15 - 30 mins
Pliers, Screw drivers

lifted hood top unscrewed 4 small screws opening lid to switch housing took out 2 small screws that held the switch and then transfered wires to new switch replaced new switch with 2 new screws and back to working again walla! Time spent less than 30 minutes very simple as the instructions were very self explainatory.

Was this helpful?

The switch had shorted

8 of 12 people found this instruction helpful.

Stephen from COlleyville, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers

I reviewed the schematic. Removed the outer casing. Pulled out the existing wires and replaced them exactly on the new switch. Snipped out off the control stem to match the others. There was a small metal piece on the old stem which holds on the knob. I removed it from the old stem and put it on the new stem and Eureka.

Was this helpful?