10655128700 Whirlpool Refrigerator - Overview

Diagrams for 10655128700

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Crisper Drawer with Humidity Control – Part Number: WP2188656
$149.16
In Stock
Refrigerator Crisper Drawer with Humidity Control
★★★★★
★★★★★
(79)
Part #WP2188656
This is a genuine OEM approved replacement. The Crisper Drawer with Humidity Control allows you to adjust the humidity within the crisper. This can extend the life of your produce.
Refrigerator Capacitor – Part Number: WPW10662129
$58.29
In Stock
Refrigerator Capacitor
★★★★★
★★★★★
(36)
Part #WPW10662129
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Defrost Timer – Part Number: W10822278
$45.92
In Stock
Defrost Timer
★★★★★
★★★★★
(12)
Part #W10822278
This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number. NOTE: The black lead on the defrost timer, will go to terminal number 2.
Refrigerator Thermostat Assembly – Part Number: WP2198202
$94.98
In Stock
Refrigerator Thermostat Assembly
★★★★★
★★★★★
(25)
Part #WP2198202
The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Ice Door Kit – Part Number: W10823377
$97.99
Special Order
Ice Door Kit
★★★★★
★★★★★
(11)
Part #W10823377
This kit includes the ice door, support, spring and delay. The heater ribbon is no longer attached - the heater is no longer needed.
Refrigerator Water Fill Cup & Bearing – Part Number: WP628356
$46.15
On Order
Refrigerator Water Fill Cup & Bearing
★★★★★
★★★★★
(1)
Part #WP628356
This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.
Screw – Part Number: WP489483
$17.55
In Stock
Screw
Part #WP489483
This screw is sold individually.
Crisper Cover with Glass – Part Number: W10508993
$236.22
In Stock
Crisper Cover with Glass
★★★★★
★★★★★
(6)
Part #W10508993
This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails. Follow the instructions in the owner's manual or installation guide when installing this part. This comes with glass.
Refrigerator Spill-Guard Glass Shelf – Part Number: WPW10276354
$261.66
In Stock
Refrigerator Spill-Guard Glass Shelf
★★★★★
★★★★★
(4)
Part #WPW10276354
This is the frame and the glass together. Follow the directions in the owner's manual to install refrigerator shelf WPW10276354 in your refrigerator. Wear work gloves to protect your hands.
Refrigerator Screw – Part Number: WP489497
$17.55
In Stock
Refrigerator Screw
Part #WP489497
Sold individually.
Refrigerator Levers Retainer Clip – Part Number: WP2194719
$17.95
In Stock
Refrigerator Levers Retainer Clip
★★★★★
★★★★★
(5)
Part #WP2194719
This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer holds in the pivot points of the ice and water arms. If it breaks, the arms will be loose and can shake around. The top half springs the ice and water arms back into the original position, and if the retainer is broken, they will not be able to do this. The dispenser lever retainer is found behind the dispenser trim and can be removed with a ¼ inch nut driver. This part is sold individually and is an OEM part.

Common Symptoms of the 10655128700

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
track of the pan become broken
426 of 450 people found this instruction helpful.
  • Darrell from Cedar Bluff, VA
  • Really Easy
  • Less than 15 mins
Buy a new crisper pan,slide out old one ,slide in new one
Was this helpful?
Thank you for voting!
My refrigerator stopped cooling and the freezer section stopped freezing
441 of 556 people found this instruction helpful.
  • garth from forest lake, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le t's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
Was this helpful?
Thank you for voting!
inconsistent compressor and condensor fan operation
308 of 327 people found this instruction helpful.
  • Steve earney from Brooks, GA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Compressor start relay would cycle several times before compressor would come on. Replaced start relay and defrost timer assy. Operated more consistently however not completely reliable. Ice would begin to melt. Noticed that if you would cycle the temperature control the compressor would start again and operate for several hours then n ot cycle again. Jumpered temp control and operation was continuous and reliable. Replaced cold control thermostat. Operation now normal. Suspect high resistance in switch caused start relay and timer contacts to arc. Small amount of carbon noticed under temp control...
Was this helpful?
Thank you for voting!